Specification sheet Wheel Loader Ref terex-tl80-wheel-loader

Terex TL80

The Terex TL80 is a wheel loader with an operating weight of 11,240 lb (5,098.38 kg), a 60 hp engine, and a 1.18 yd³ (0.9 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
11,240lb
5,098.38kg
Engine power
60hp
44.8kW
Net Power
Bucket capacity
1.18yd³
0.9m³

Where it sits in its classpercentile · compact wheel loaders

Among 374 compact wheel loaders (≤22,000 lb), the Terex TL80 sits below the median for its class:

  • Operating weight 11,240 lb lighter than 61% (n=374)
  • Engine power 60 hp less powerful than 65% (n=367)
  • Bucket capacity 1.2 yd³ smaller-bucket than 64% (n=309)

Scale drawingdrawn to scale · mm

2670B435C4960A
Side elevation
2670B1780D
Front elevation

01 Engine Specification

Number Of Cylinders 4
Engine Make 2349
Engine Model F4M 2011
Net Power 60hp 44.8kw
Power Measured @ 2300rpm
Displacement 189cu in 3.1L
Aspiration natural

02 Operational Specification

Operating Weight 11240lb 5098.4kg
Fuel Capacity 19.9gal 75L
Hydraulic System Fluid Capacity 14.6gal 55L
Static Tipping Weight 8577lb 3890.5kg
Turning Radius 13.6ft in 4140mm
Operating Voltage 12V
Rear Axle Oscillation 24degrees
Tire Size 405/70 R 18 SPT9

03 Transmission Specification

Transmission Type hydrostatic
Number Of Forward Gears 2
Number Of Reverse Gears 2
Max Speed - Forward 12.5mph 20km/h
Max Speed - Reverse 12.5mph 20km/h

04 Hydraulic System Specification

Relief Valve Setting 3625psi 24993.5kPa
Pump Flow Capacity 17gal/min 64.4L/min

05 Bucket Dimensions

Dump Clearance At Max Raise 8.37ft in 2550mm
Bucket Capacity - Heaped 1.18yd3 0.9m3
Bucket Width 6.07ft in 1850mm
Breakout Force 10128lb 45kN

06 Dimensions Dimensions

Ground Clearance 1.43ft in 435mm
Length With Bucket On Ground 16.28ft in 4960mm
Width Over Tires 5.84ft in 1780mm
Height To Top Of Cab 8.76ft in 2670mm
Wheelbase 6.89ft in 2100mm
Hinge Pin - Max Height 10.5ft in 3200mm
Reach At Max Lift And Dump 2.3ft in 700mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.