Specification sheet Wheel Loader Ref terex-tl65-wheel-loader

Terex TL65

The Terex TL65 is a wheel loader with an operating weight of 9,040 lb (4,100.48 kg), a 50 hp engine, and a 0.95 yd³ (0.72 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
9,040lb
4,100.48kg
Engine power
50hp
37.3kW
Net Power
Bucket capacity
0.95yd³
0.72m³

Where it sits in its classpercentile · compact wheel loaders

Among 374 compact wheel loaders (≤22,000 lb), the Terex TL65 sits below the median for its class:

  • Operating weight 9,040 lb lighter than 82% (n=374)
  • Engine power 50 hp less powerful than 80% (n=367)
  • Bucket capacity 0.9 yd³ smaller-bucket than 80% (n=309)

Scale drawingdrawn to scale · mm

2610B410C4780A
Side elevation
2610B1650D
Front elevation

01 Engine Specification

Number Of Cylinders 4
Engine Make 2349
Engine Model F4M 2011
Net Power 50hp 37.3kw
Power Measured @ 2300rpm
Displacement 189cu in 3.1L
Aspiration natural

02 Operational Specification

Operating Weight 9040lb 4100.5kg
Fuel Capacity 19.9gal 75L
Hydraulic System Fluid Capacity 13gal 49L
Static Tipping Weight 6558.8lb 2975kg
Turning Radius 12.7ft in 3870mm
Operating Voltage 12V
Rear Axle Oscillation 24degrees
Tire Size 365/70 R18 EM01 Mitas

03 Transmission Specification

Transmission Type Hydrostatic
Number Of Forward Gears 2
Number Of Reverse Gears 2
Max Speed - Forward 12.5mph 20km/h
Max Speed - Reverse 12.5mph 20km/h

04 Hydraulic System Specification

Relief Valve Setting 3625psi 24993.5kPa
Pump Flow Capacity 11gal/min 41.7L/min

05 Bucket Dimensions

Dump Clearance At Max Raise 8.27ft in 2520mm
Bucket Capacity - Heaped 0.95yd3 0.72m3
Bucket Width 5.58ft in 1700mm
Breakout Force 8325lb 37.04kN

06 Dimensions Dimensions

Ground Clearance 1.35ft in 410mm
Length With Bucket On Ground 15.69ft in 4780mm
Width Over Tires 5.42ft in 1650mm
Height To Top Of Cab 8.57ft in 2610mm
Wheelbase 6.4ft in 1950mm
Hinge Pin - Max Height 10.24ft in 3120mm
Reach At Max Lift And Dump 1.91ft in 580mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.