Specification sheet Wheel Loader Ref terex-tl160-wheel-loader

Terex TL160

The Terex TL160 is a wheel loader with an operating weight of 20,283 lb (9,200.22 kg), a 102 hp engine, and a 2.1 yd³ (1.61 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
20,283lb
9,200.22kg
Engine power
102hp
76.1kW
Net Power
Bucket capacity
2.1yd³
1.61m³

Where it sits in its classpercentile · compact wheel loaders

Among 374 compact wheel loaders (≤22,000 lb), the Terex TL160 sits at the heavy end of its class:

  • Operating weight 20,280 lb heavier than 91% (n=374)
  • Engine power 102 hp more powerful than 82% (n=367)
  • Bucket capacity 2.1 yd³ larger-bucket than 83% (n=309)

Scale drawingdrawn to scale · mm

3030B540C6690A
Side elevation
3030B2150D
Front elevation

01 Engine Specification

Number Of Cylinders 4
Engine Make 2351
Engine Model 1104C-44T
Net Power 102hp 76.1kw
Power Measured @ 2200rpm
Displacement 268cu in 4.4L
Aspiration turbocharged

02 Operational Specification

Operating Weight 20283lb 9200.3kg
Fuel Capacity 37gal 140L
Hydraulic System Fluid Capacity 24.6gal 93L
Static Tipping Weight 15985.8lb 7251kg
Turning Radius 17.8ft in 5400mm
Operating Voltage 24V
Rear Axle Oscillation 24degrees
Tire Size 15.5R25 EM 60 12 PR

03 Transmission Specification

Transmission Type hydrostatic
Number Of Forward Gears 2
Number Of Reverse Gears 2
Max Speed - Forward 12.5mph 20km/h
Max Speed - Reverse 12.5mph 20km/h

04 Hydraulic System Specification

Relief Valve Setting 4061psi 27999.6kPa
Pump Flow Capacity 26.2gal/min 99L/min

05 Bucket Dimensions

Dump Clearance At Max Raise 9.62ft in 2930mm
Bucket Capacity - Heaped 2.1yd3 1.61m3
Bucket Width 7.55ft in 2300mm
Breakout Force 19334lb 86kN

06 Dimensions Dimensions

Ground Clearance 1.78ft in 540mm
Length With Bucket On Ground 21.95ft in 6690mm
Width Over Tires 7.06ft in 2150mm
Height To Top Of Cab 9.95ft in 3030mm
Wheelbase 9.06ft in 2760mm
Hinge Pin - Max Height 12.8ft in 3900mm
Reach At Max Lift And Dump 2.89ft in 880mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.