Specification sheet Wheel Loader Ref terex-tl120-wheel-loader

Terex TL120

The Terex TL120 is a wheel loader with an operating weight of 15,656 lb (7,101.45 kg), a 84 hp engine, and a 1.6 yd³ (1.23 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
15,656lb
7,101.45kg
Engine power
84hp
62.7kW
Net Power
Bucket capacity
1.6yd³
1.23m³

Where it sits in its classpercentile · compact wheel loaders

Among 374 compact wheel loaders (≤22,000 lb), the Terex TL120 sits above the median for its class:

  • Operating weight 15,660 lb heavier than 67% (n=374)
  • Engine power 84 hp more powerful than 66% (n=367)
  • Bucket capacity 1.6 yd³ larger-bucket than 67% (n=309)

Scale drawingdrawn to scale · mm

2780B460C5635A
Side elevation
2780B1980D
Front elevation

01 Engine Specification

Number Of Cylinders 4
Engine Make 2351
Engine Model 1104C-44
Net Power 84hp 62.7kw
Power Measured @ 2200rpm
Displacement 269cu in 4.5L
Aspiration natural

02 Operational Specification

Operating Weight 15656lb 7101.5kg
Fuel Capacity 29.1gal 110L
Hydraulic System Fluid Capacity 24.6gal 93L
Static Tipping Weight 11642lb 5280.8kg
Turning Radius 15.3ft in 4640mm
Operating Voltage 12V
Rear Axle Oscillation 24degrees
Tire Size 405/70 R 20 EM 01 Mitas

03 Transmission Specification

Transmission Type hydrostatic
Number Of Forward Gears 2
Number Of Reverse Gears 2
Max Speed - Forward 12.5mph 20km/h
Max Speed - Reverse 12.5mph 20km/h

04 Hydraulic System Specification

Relief Valve Setting 3625psi 24993.5kPa
Pump Flow Capacity 20gal/min 75.8L/min

05 Bucket Dimensions

Dump Clearance At Max Raise 9.03ft in 2750mm
Bucket Capacity - Heaped 1.6yd3 1.23m3
Bucket Width 6.89ft in 2100mm
Breakout Force 13275lb 59.05kN

06 Dimensions Dimensions

Ground Clearance 1.51ft in 460mm
Length With Bucket On Ground 18.49ft in 5635mm
Width Over Tires 6.5ft in 1980mm
Height To Top Of Cab 9.13ft in 2780mm
Wheelbase 7.52ft in 2290mm
Hinge Pin - Max Height 11.59ft in 3530mm
Reach At Max Lift And Dump 2.63ft in 800mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.