Specification sheet Wheel Loader Ref terex-tl100-wheel-loader

Terex TL100

The Terex TL100 is a wheel loader with an operating weight of 13,230 lb (6,001.03 kg), a 73.5 hp engine, and a 1.3 yd³ (1 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
13,230lb
6,001.03kg
Engine power
73.5hp
54.9kW
Net Power
Bucket capacity
1.3yd³
1m³

Where it sits in its classpercentile · compact wheel loaders

Among 374 compact wheel loaders (≤22,000 lb), the Terex TL100 sits in the middle of its class:

  • Operating weight 13,230 lb heavier than 57% (n=374)
  • Engine power 74 hp more powerful than 52% (n=367)
  • Bucket capacity 1.3 yd³ smaller-bucket than 57% (n=309)

Scale drawingdrawn to scale · mm

2765B460C5310A
Side elevation
2765B1850D
Front elevation

01 Engine Specification

Number Of Cylinders 4
Engine Make 2349
Engine Model BF 4M 2011
Net Power 73.5hp 54.9kw
Power Measured @ 2200rpm
Displacement 189cu in 3.1L
Aspiration natural

02 Operational Specification

Operating Weight 13230lb 6001.1kg
Fuel Capacity 29.1gal 110L
Hydraulic System Fluid Capacity 23.3gal 88L
Static Tipping Weight 10538.1lb 4780kg
Turning Radius 14.6ft in 4450mm
Operating Voltage 12V
Rear Axle Oscillation 24degrees
Tire Size 405/70 R 20 EM 01 Mitas

03 Transmission Specification

Transmission Type Hydrosatic
Number Of Forward Gears 2
Number Of Reverse Gears 2
Max Speed - Forward 12.5mph 20km/h
Max Speed - Reverse 12.5mph 20km/h

04 Hydraulic System Specification

Relief Valve Setting 3625psi 24993.5kPa
Pump Flow Capacity 19gal/min 72L/min

05 Bucket Dimensions

Dump Clearance At Max Raise 8.65ft in 2635mm
Bucket Capacity - Heaped 1.3yd3 1m3
Bucket Width 6.4ft in 1950mm
Breakout Force 12375lb 55.04kN

06 Dimensions Dimensions

Ground Clearance 1.51ft in 460mm
Length With Bucket On Ground 17.43ft in 5310mm
Width Over Tires 6.07ft in 1850mm
Height To Top Of Cab 9.08ft in 2765mm
Wheelbase 7.29ft in 2220mm
Hinge Pin - Max Height 11.06ft in 3370mm
Reach At Max Lift And Dump 2.33ft in 710mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.