Terex TC29
The Terex TC29 is a mini excavator with an operating weight of 6,480 lb, a 28 hp engine, and a dig depth of 9.06 ft.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the Terex TC29 sits in the middle of its class:
- Operating weight 6,480 lb lighter than 51% (n=438)
- Engine power 28 hp more powerful than 64% (n=448)
- Dig depth 9.1 ft shallower-digging than 51% (n=426)
01 Boom/Stick Option (Hex) 1 Specification
| Max Cutting Height | 13.36ft in | 4,072mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Loading Height | 9.32ft in | 2,841mm‖ — metric converted from the published imperial value |
| Max Vertical Wall Digging Depth | 4.93ft in | 1,503mm‖ — metric converted from the published imperial value |
| Max Digging Depth | 9.06ft in | 2,761mm‖ — metric converted from the published imperial value |
| Boom/Stick Option (Hex) 1 | boom w/ dipperstick 53'' (1350mm) |
02 Boom/Stick Option (Hex) 2 Specification
| Max Cutting Height | 13.75ft in | 4,191mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Loading Height | 9.72ft in | 2,963mm‖ — metric converted from the published imperial value |
| Max Vertical Wall Digging Depth | 5.09ft in | 1,551mm‖ — metric converted from the published imperial value |
| Max Digging Depth | 9.72ft in | 2,963mm‖ — metric converted from the published imperial value |
| Boom/Stick Option (Hex) 2 | boom w/ dipperstick 61'' (1550mm) |
03 Dimensions Specification
| Width To Outside Of Tracks | 4.6ft in | 1,402mm‖ — metric converted from the published imperial value |
|---|---|---|
| Ground Clearance | 0.89ft in | 271mm‖ — metric converted from the published imperial value |
| Height To Top Of Cab | 8.21ft in | 2,502mm‖ — metric converted from the published imperial value |
| Tail Swing Radius | 4.27ft in | 1,301mm‖ — metric converted from the published imperial value |
04 Undercarriage Specification
| Shoe Size | 11.82in | 300.2mm‖ — metric converted from the published imperial value |
|---|---|---|
| Track Gauge | 3.61ft in | 1,100mm‖ — metric converted from the published imperial value |
| Max Travel Speed | 2.86mph | 4.6km/h‖ — metric converted from the published imperial value |
| Drawbar Pull | 6300lb | 2,858kg‖ — metric converted from the published imperial value |
| Ground Pressure | 3.9psi | 27kpa‖ — metric converted from the published imperial value |
05 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2251 | |
| Engine Model | S 4L | |
| Net Power | 28hp | 21kw‖ — metric converted from the published imperial value |
| Power Measured @ | 2200rpm | |
| Displacement | 91cu in | 1,491cm3‖ — metric converted from the published imperial value |
06 Operational Specification
| Operating Weight | 6480lb | 2,939kg‖ — metric converted from the published imperial value |
|---|---|---|
| Fuel Capacity | 13.8gal | 52.2l‖ — metric converted from the published imperial value |
| Hydraulic System Fluid Capacity | 22.5gal | 85.2l‖ — metric converted from the published imperial value |
| Operating Voltage | 12V | |
| Hydraulic System Relief Valve Pressure | 3050psi | 21,029kpa‖ — metric converted from the published imperial value |
| Hydraulic Pump Flow Capacity | 26.2gal/min | 99.2l/min‖ — metric converted from the published imperial value |
07 Swing Mechanism Specification
| Swing Speed | 10rpm |
|---|
08 Buckets Specification
| Reference Bucket Capacity | 0.1yd3 | |
|---|---|---|
| Minimum Bucket Capacity | 0.1yd3 | |
| Maximum Bucket Capacity | 0.2yd3 |
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.