Specification sheet Wheel Loader Ref terex-skl834-wheel-loader

Terex SKL834

The Terex SKL834 is a wheel loader with an operating weight of 10,582.19 lb (4,800 kg), a 59.1 hp engine, and a 1.05 yd³ (0.8 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
10,582.19lb
4,800kg
Engine power
59.1hp
44kW
Net Power
Bucket capacity
1.05yd³
0.8m³

Where it sits in its classpercentile · compact wheel loaders

Among 374 compact wheel loaders (≤22,000 lb), the Terex SKL834 sits below the median for its class:

  • Operating weight 10,580 lb lighter than 68% (n=374)
  • Engine power 59 hp less powerful than 66% (n=367)
  • Bucket capacity 1.1 yd³ smaller-bucket than 76% (n=309)

Scale drawingdrawn to scale · mm

2670B435C4955A
Side elevation
2670B1780D
Front elevation

01 Engine Specification

Number Of Cylinders 4
Engine Make 2349
Engine Model F4M2011
Net Power 59.1hp 44kw
Displacement 189.2cu in 3.1L

02 Operational Specification

Operating Weight 10582.2lb 4800kg
Fuel Capacity 19.9gal 75L
Hydraulic System Fluid Capacity 14.6gal 55L
Static Tipping Weight 7716.2lb 3500kg
Operating Voltage 12V
Tire Size 405/70 R 18

03 Transmission Specification

Transmission Type Hydrostatic
Number Of Forward Gears 2
Number Of Reverse Gears 2
Max Speed - Forward 12.5mph 20km/h
Max Speed - Reverse 12.5mph 20km/h

04 Hydraulic System Specification

Relief Valve Setting 3625psi 24993.5kPa
Pump Flow Capacity 17gal/min 64.4L/min
Pump Type proportional hydraulic valve with 3 control circuits and high speed valve for tilting

05 Bucket Dimensions

Dump Clearance At Max Raise 8.37ft in 2550mm
Bucket Capacity - Heaped 1.05yd3 0.8m3
Breakout Force _- 45kN

06 Dimensions Dimensions

Ground Clearance 1.43ft in 435mm
Length With Bucket On Ground 16.26ft in 4955mm
Width Over Tires 5.84ft in 1780mm
Height To Top Of Cab 8.76ft in 2670mm
Wheelbase 6.89ft in 2100mm
Hinge Pin - Max Height 10.5ft in 3200mm
Reach At Max Lift And Dump 2.3ft in 700mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.