Specification sheet Wheel Loader Ref terex-skl824-wheel-loader
Terex SKL824
The Terex SKL824 is a wheel loader with an operating weight of 9,038.96 lb (4,100 kg), a 50 hp engine, and a 0.86 yd³ (0.65 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
9,038.96lb
4,100kg
Engine power
50hp
37.3kW
Net Power Bucket capacity
0.86yd³
0.65m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Terex SKL824 sits below the median for its class:
- Operating weight 9,040 lb lighter than 83% (n=374)
- Engine power 50 hp less powerful than 80% (n=367)
- Bucket capacity 0.9 yd³ smaller-bucket than 84% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2349 | |
| Engine Model | F4M2011 | |
| Net Power | 50hp | 37.3kw |
| Displacement | 189.2cu in | 3.1L |
02 Operational Specification
| Operating Weight | 9039lb | 4100kg |
|---|---|---|
| Fuel Capacity | 19.9gal | 75L |
| Hydraulic System Fluid Capacity | 13gal | 49L |
| Static Tipping Weight | 6558.8lb | 2975kg |
| Operating Voltage | 12V | |
| Tire Size | 365/70 R 18 |
03 Transmission Specification
| Transmission Type | Hydrostatic | |
|---|---|---|
| Number Of Forward Gears | 2 | |
| Number Of Reverse Gears | 2 | |
| Max Speed - Forward | 12.5mph | 20km/h |
| Max Speed - Reverse | 12.5mph | 20km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3625psi | 24993.5kPa |
|---|---|---|
| Pump Flow Capacity | 10.9gal/min | 41L/min |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.26ft in | 2515mm |
|---|---|---|
| Bucket Capacity - Heaped | 0.86yd3 | 0.65m3 |
| Breakout Force | _- | 37kN |
06 Dimensions Dimensions
| Ground Clearance | 1.35ft in | 410mm |
|---|---|---|
| Length With Bucket On Ground | 15.69ft in | 4780mm |
| Height To Top Of Cab | 8.57ft in | 2610mm |
| Wheelbase | 6.4ft in | 1950mm |
| Hinge Pin - Max Height | 10.24ft in | 3120mm |
| Reach At Max Lift And Dump | 1.91ft in | 580mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.