Specification sheet Wheel Loader Ref terex-skl823-wheel-loader
Terex SKL823
The Terex SKL823 is a wheel loader with an operating weight of 8,598.03 lb (3,900 kg), and a 49.7 hp engine.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
8,598.03lb
3,900kg
Engine power
49.7hp
37kW
Net Power ◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Terex SKL823 sits below the median for its class:
- Operating weight 8,600 lb lighter than 84% (n=374)
- Engine power 50 hp less powerful than 80% (n=367)
Not positioned on bucket capacity — withheld or unpublished for this machine.
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | Perkins | |
| Net Power | 49.7hp | 37kw |
| Displacement | 183.1cu in | 3L |
| Net Torque | 137.2lb ft | 186Nm |
02 Operational Specification
| Operating Weight | 8598.1lb | 3900kg |
|---|---|---|
| Fuel Capacity | 19.1gal | 72L |
| Hydraulic System Fluid Capacity | 16.2gal | 61L |
| Engine Oil Fluid Capacity | 2.2gal | 8.2L |
| Transmission Fluid Capacity | 0.4gal | 1.5L |
| Front Axle/Diff Fluid Capacity | 1.8gal | 6.5L |
| Rear Axle/Diff Fluid Capacity | 1.8gal | 6.5L |
| Operating Voltage | 12V | |
| Rear Axle Oscillation | 12degrees | |
| Tire Size | 365/70 R 18 SPT 9 |
03 Hydraulic System Specification
| Dump Time | 1.1sec | |
|---|---|---|
| Lower Time | 3.6sec |
04 Bucket Dimensions
| Bucket Width | 5.58ft in | 1700mm |
|---|
05 Dimensions Dimensions
| Ground Clearance | 1.42ft in | 430mm |
|---|---|---|
| Length With Bucket On Ground | 15.85ft in | 4830mm |
| Width Over Tires | 5.39ft in | 1640mm |
| Height To Top Of Cab | 8.58ft in | 2615mm |
| Wheelbase | 6.4ft in | 1950mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.