Specification sheet Wheel Loader Ref terex-skl260h-wheel-loader

Terex SKL260H

The Terex SKL260H is a wheel loader with an operating weight of 32,855 lb (14,902.78 kg), a 175 hp engine, and a 3.41 yd³ (2.6 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
32,855lb
14,902.78kg
Engine power
175hp
130.5kW
Net Power
Bucket capacity
3.41yd³
2.6m³

Where it sits in its classpercentile · small wheel loaders

Among 439 small wheel loaders (22,000–45,000 lb), the Terex SKL260H sits in the middle of its class:

  • Operating weight 32,860 lb heavier than 59% (n=439)
  • Engine power 175 hp more powerful than 62% (n=408)
  • Bucket capacity 3.4 yd³ larger-bucket than 56% (n=387)

Scale drawingdrawn to scale · mm

3200B620C7290A
Side elevation
3200B2350D
Front elevation

01 Engine Specification

Number Of Cylinders 6
Engine Make 2351
Engine Model 1106C-E60 TA
Net Power 175hp 130.5kw
Power Measured @ 2200rpm
Displacement 366cu in 6L
Aspiration turbocharged

02 Operational Specification

Operating Weight 32855lb 14902.8kg
Fuel Capacity 63.5gal 240L
Hydraulic System Fluid Capacity 35.7gal 135L
Static Tipping Weight 24250.9lb 11000kg
Turning Radius 20ft in 6080mm
Operating Voltage 24V
Rear Axle Oscillation 24degrees
Tire Size 20.5-25 EM

03 Transmission Specification

Transmission Type hydrostatic
Number Of Forward Gears 2
Number Of Reverse Gears 2
Max Speed - Forward 24.9mph 40km/h
Max Speed - Reverse 24.9mph 40km/h

04 Hydraulic System Specification

Relief Valve Setting 4500psi 31026.4kPa
Pump Flow Capacity 42.3gal/min 160.2L/min

05 Bucket Dimensions

Dump Clearance At Max Raise 9.36ft in 2850mm
Bucket Capacity - Heaped 3.41yd3 2.6m3
Bucket Width 8.21ft in 2500mm
Breakout Force 26978lb 119.9kN

06 Dimensions Dimensions

Ground Clearance 2.04ft in 620mm
Length With Bucket On Ground 23.92ft in 7290mm
Width Over Tires 7.71ft in 2350mm
Height To Top Of Cab 10.5ft in 3200mm
Wheelbase 10.18ft in 3100mm
Hinge Pin - Max Height 13.26ft in 4040mm
Reach At Max Lift And Dump 3.78ft in 1150mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.