Specification sheet Wheel Loader Ref terex-skl200-wheel-loader

Terex SKL200

The Terex SKL200 is a wheel loader with an operating weight of 27,557.79 lb (12,500 kg), a 142.2 hp engine, and a 2.62 yd³ (2 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
27,557.79lb
12,500kg
Engine power
142.2hp
106kW
Net Power
Bucket capacity
2.62yd³
2m³

Where it sits in its classpercentile · small wheel loaders

Among 439 small wheel loaders (22,000–45,000 lb), the Terex SKL200 sits below the median for its class:

  • Operating weight 27,560 lb lighter than 70% (n=439)
  • Engine power 142 hp less powerful than 72% (n=408)
  • Bucket capacity 2.6 yd³ smaller-bucket than 76% (n=387)

Scale drawingdrawn to scale · mm

3100B640C6880A
Side elevation

01 Engine Specification

Engine Make 2351
Engine Model 1106C-E60 ETA
Net Power 142.2hp 106kw

02 Operational Specification

Operating Weight 27557.8lb 12500kg
Fuel Capacity 55.5gal 210L
Static Tipping Weight 18518.9lb 8400kg
Tire Size 20.5-25

03 Transmission Specification

Transmission Type Hydrostatic

04 Bucket Dimensions

Dump Clearance At Max Raise 9.91ft in 3020mm
Bucket Capacity - Heaped 2.62yd3 2m3
Breakout Force _- 113kN

05 Dimensions Dimensions

Ground Clearance 2.1ft in 640mm
Length With Bucket On Ground 22.58ft in 6880mm
Height To Top Of Cab 10.18ft in 3100mm
Wheelbase 9.52ft in 2900mm
Reach At Max Lift And Dump 3.75ft in 1140mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.