Specification sheet Compact Track Loader Ref terex-pt80-multi-terrain-loader

Terex PT80

The Terex PT80 is a compact track loader with an operating weight of 8,972 lb (4,069.64 kg), a 83 hp engine, a rated operating capacity of 3,100 lb (1,406.14 kg), and a tipping load of 6,200 lb (2,812.28 kg).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
8,972lb
4,069.64kg
Engine power
83hp
61.9kW
Gross Power
Rated operating capacity
3,100lb
1,406.14kg
Tipping load
6,200lb † — value reconstructed from related published figures
2,812.28kg

◆Where it sits in its classpercentile · compact track loaders

Among 184 compact track loaders , the Terex PT80 sits in the middle of its class:

  • Operating weight 8,970 lb lighter than 58% (n=182)
  • Engine power 83 hp more powerful than 72% (n=167)
  • Rated operating capacity 3,100 lb higher-rated than 67% (n=156)

◇Scale drawingdrawn to scale · mm

2210C381D3632A2845B1803E
Side elevation
2210C1778F
Front elevation

01 Engine Specification

Number Of Cylinders 4
Engine Make 2351
Engine Model 804D-33T
Gross Power 83hp 61.9kw
Power Measured @ 2800rpm
Peak Torque 195.5lb ft 265.1Nm
Displacement 202cu in 3.4L
Aspiration Turbocharged

02 Operational Specification

Operating Weight 8972lb 4069.7kg
Cooling System Fluid Capacity 3gal 11.4L
Fuel Capacity 18gal 68.2L
Engine Oil Capacity 2.3gal 8.5L
Hydraulic System Fluid Capacity 21gal 79.5L
Operating Voltage 12V
Alternator Supplied Amperage 90amps
Max Speed - Low Range 7mph 11.3km/h
Max Speed - High Range 12.5mph 20.2km/h

03 Loader Specification

Operating Load 3100lb 1406.2kg

04 Hydraulic Specification

Pump Flow 17.4gal/min 65.9L/min
Relief Valve Pressure 3000psi 20684.3kPa

05 Dimensions Dimensions

Width Over Tracks 5.84ft in 1778mm
Height To Top Of Cab 7.26ft in 2210mm
Ground Clearance 15in 381mm
Clearance At Max Lift And Dump 8.26ft in 2515mm
Length With Out Bucket 9.34ft in 2845mm
Length With Bucket 11.92ft in 3632mm

06 Undercarriage Dimensions

Length Of Track On Ground 5.92ft in 1803mm
Ground Contact Area 2556in2 1.65m2
Ground Pressure 3.5psi 24.14kPa
Number Of Track Rollers Per Side 24
Width Of Track 18in 457mm

Data notes

†

Derived value. tipping load was not published directly in a usable form by the source. It was reconstructed from related published figures and accepted only after validating against the expected relationship between specifications for this machine class.

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.