Specification sheet Compact Track Loader Ref terex-pt100g-multi-terrain-loader

Terex PT100G

The Terex PT100G is a compact track loader with an operating weight of 11,462 lb (5,199.08 kg), a 99.9 hp engine, a rated operating capacity of 4,000 lb (1,814.37 kg), and a tipping load of 8,000 lb (3,628.74 kg).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
11,462lb
5,199.08kg
Engine power
99.9hp
74.5kW
Gross Power
Rated operating capacity
4,000lb
1,814.37kg
Tipping load
8,000lb † — value reconstructed from related published figures
3,628.74kg

◆Where it sits in its classpercentile · compact track loaders

Among 184 compact track loaders , the Terex PT100G sits at the heavy end of its class:

  • Operating weight 11,460 lb heavier than 90% (n=182)
  • Engine power 100 hp more powerful than 96% (n=167)
  • Rated operating capacity 4,000 lb higher-rated than 89% (n=156)

◇Scale drawingdrawn to scale · mm

2172C375D3785A2985B1803E
Side elevation
2172C1778F
Front elevation

01 Engine Specification

Number Of Cylinders 4
Engine Make 2351
Engine Model 1104D-44T
Gross Power 99.9hp 74.5kw
Power Measured @ 2200rpm
Peak Torque 310lb ft 420.4Nm
Displacement 268cu in 4.4L
Aspiration Turbocharged

02 Operational Specification

Operating Weight 11462lb 5199.1kg
Cooling System Fluid Capacity 4.3gal 16.3L
Fuel Capacity 30gal 113.6L
Engine Oil Capacity 2.3gal 8.5L
Hydraulic System Fluid Capacity 22gal 83.3L
Operating Voltage 12V
Alternator Supplied Amperage 120amps
Max Speed - Low Range 6mph 9.7km/h
Max Speed - High Range 10mph 16.1km/h

03 Loader Specification

Operating Load 4000lb 1814.4kg

04 Hydraulic Specification

Pump Flow 20gal/min 75.8L/min
Relief Valve Pressure 3300psi 22752.7kPa

05 Dimensions Dimensions

Width Over Tracks 5.84ft in 1778mm
Height To Top Of Cab 7.13ft in 2172mm
Ground Clearance 14.77in 375mm
Clearance At Max Lift And Dump 7.59ft in 2311mm
Length With Out Bucket 9.8ft in 2985mm
Length With Bucket 12.42ft in 3785mm

06 Undercarriage Dimensions

Length Of Track On Ground 5.92ft in 1803mm
Ground Contact Area 2556in2 1.65m2
Ground Pressure 4.5psi 31.03kPa
Number Of Track Rollers Per Side 24
Width Of Track 18in 457mm

Data notes

†

Derived value. tipping load was not published directly in a usable form by the source. It was reconstructed from related published figures and accepted only after validating against the expected relationship between specifications for this machine class.

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.