Terex HR16
The Terex HR16 is a mini excavator with an operating weight of 7,980.8 lb, a 36 hp engine, and a dig depth of 11.16 ft.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the Terex HR16 sits above the median for its class:
- Operating weight 7,980 lb heavier than 72% (n=438)
- Engine power 36 hp more powerful than 78% (n=448)
- Dig depth 11.2 ft deeper-digging than 80% (n=426)
01 Boom/Stick Option (Hex) 1 Specification
| Max Cutting Height | 15.52ft in | 4,730mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Loading Height | 10.57ft in | 3,222mm‖ — metric converted from the published imperial value |
| Max Reach Along Ground | 18.18ft in | 5,541mm‖ — metric converted from the published imperial value |
| Max Vertical Wall Digging Depth | 5.32ft in | 1,622mm‖ — metric converted from the published imperial value |
| Max Digging Depth | 11.16ft in | 3,402mm‖ — metric converted from the published imperial value |
| Boom/Stick Option (Hex) 1 | Monobloc boom Dipperstick 1600mm |
02 Boom/Stick Option (Hex) 2 Specification
| Max Cutting Height | 15.92ft in | 4,852mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Loading Height | 10.96ft in | 3,341mm‖ — metric converted from the published imperial value |
| Max Reach Along Ground | 18.77ft in | 5,721mm‖ — metric converted from the published imperial value |
| Max Vertical Wall Digging Depth | 5.62ft in | 1,713mm‖ — metric converted from the published imperial value |
| Max Digging Depth | 11.82ft in | 3,603mm‖ — metric converted from the published imperial value |
| Boom/Stick Option (Hex) 2 | Monobloc boom Dipperstick 1800mm |
03 Dimensions Specification
| Width To Outside Of Tracks | 4.93ft in | 1,503mm‖ — metric converted from the published imperial value |
|---|---|---|
| Ground Clearance | 0.99ft in | 302mm‖ — metric converted from the published imperial value |
| Height To Top Of Cab | 8.21ft in | 2,502mm‖ — metric converted from the published imperial value |
| Tail Swing Radius | 4.6ft in | 1,402mm‖ — metric converted from the published imperial value |
04 Undercarriage Specification
| Shoe Size | 11.82in | 300.2mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Travel Speed | 2.61mph | 4.2km/h‖ — metric converted from the published imperial value |
| Drawbar Pull | 6750lb | 3,062kg‖ — metric converted from the published imperial value |
05 Engine Specification
| Engine Make | 2251 | |
|---|---|---|
| Engine Model | S 4L-2-61 KL | |
| Net Power | 36hp | 27kw‖ — metric converted from the published imperial value |
| Displacement | 107cu in | 1,753cm3‖ — metric converted from the published imperial value |
06 Operational Specification
| Operating Weight | 7980.8lb | 3,620kg‖ — metric converted from the published imperial value |
|---|---|---|
| Fuel Capacity | 13.8gal | 52.2l‖ — metric converted from the published imperial value |
| Hydraulic System Fluid Capacity | 24.1gal | 91.2l‖ — metric converted from the published imperial value |
| Operational Voltage | 12V | |
| Hydraulic System Relief Valve Pressure | 3625psi | 24,994kpa‖ — metric converted from the published imperial value |
| Hydraulic Pump Flow Capacity | 32.5gal/min | 123l/min‖ — metric converted from the published imperial value |
07 Swing Mechanism Specification
| Swing Speed | 9.5rpm |
|---|
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.