Specification sheet Wheel Loader Ref tcm-l9-2-wheel-loader
TCM L9-2
The TCM L9-2 is a wheel loader with an operating weight of 10,350.71 lb (4,695 kg), a 59.2 hp engine, and a 1.18 yd³ (0.9 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
10,350.71lb
4,695kg
Engine power
59.2hp
44.1kW
Net Power Bucket capacity
1.18yd³
0.9m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the TCM L9-2 sits below the median for its class:
- Operating weight 10,350 lb lighter than 70% (n=374)
- Engine power 59 hp less powerful than 66% (n=367)
- Bucket capacity 1.2 yd³ smaller-bucket than 64% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2334 | |
|---|---|---|
| Engine Model | V3300-DI-KA | |
| Net Power | 59.2hp | 44.1kw |
02 Operational Specification
| Operating Weight | 10350.8lb | 4695kg |
|---|---|---|
| Fuel Capacity | 19.9gal | 75L |
| Static Tipping Weight | 7495.8lb | 3400kg |
| Tire Size | 17.5/65 |
03 Transmission Specification
| Transmission Type | powershift | |
|---|---|---|
| Max Speed - Forward | 21.4mph | 34.4km/h |
| Max Speed - Reverse | 21.4mph | 34.4km/h |
04 Bucket Dimensions
| Dump Clearance At Max Raise | 8.21ft in | 2500mm |
|---|---|---|
| Breakout Force | _- | 46.6kN |
| Bucket Capacity - Heaped | 1.18yd3 | 0.9m3 |
| Bucket Width | 6.53ft in | 1990mm |
05 Dimensions Dimensions
| Ground Clearance | 1.12ft in | 340mm |
|---|---|---|
| Length With Bucket On Ground | 16.46ft in | 5015mm |
| Height To Top Of Cab | 8.95ft in | 2725mm |
| Wheelbase | 7.22ft in | 2200mm |
| Reach At Max Lift And Dump | 3.89ft in | 1185mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.