Specification sheet Wheel Loader Ref tcm-l5-2-wheel-loader
TCM L5-2
The TCM L5-2 is a wheel loader with an operating weight of 7,198.1 lb (3,265 kg), a 36.5 hp engine, and a 0.66 yd³ (0.5 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
7,198.1lb
3,265kg
Engine power
36.5hp
27.2kW
Net Power Bucket capacity
0.66yd³
0.5m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the TCM L5-2 sits at the compact end of its class:
- Operating weight 7,200 lb lighter than 90% (n=374)
- Engine power 37 hp less powerful than 92% (n=367)
- Bucket capacity 0.7 yd³ smaller-bucket than 93% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2334 | |
|---|---|---|
| Engine Model | D1503-DI-T-K2A | |
| Net Power | 36.5hp | 27.2kw |
02 Operational Specification
| Operating Weight | 7198.1lb | 3265kg |
|---|---|---|
| Fuel Capacity | 13.3gal | 50L |
| Static Tipping Weight | 4541.6lb | 2060kg |
| Tire Size | 15.5/60 18-8 PR L2 |
03 Transmission Specification
| Transmission Type | powershift | |
|---|---|---|
| Max Speed - Forward | 9.4mph | 15km/h |
| Max Speed - Reverse | 9.4mph | 15km/h |
04 Bucket Dimensions
| Dump Clearance At Max Raise | 8.03ft in | 2445mm |
|---|---|---|
| Breakout Force | _- | 35.8kN |
| Bucket Capacity - Heaped | 0.66yd3 | 0.5m3 |
| Bucket Width | 5.55ft in | 1690mm |
05 Dimensions Dimensions
| Ground Clearance | 0.97ft in | 295mm |
|---|---|---|
| Length With Bucket On Ground | 14.52ft in | 4425mm |
| Height To Top Of Cab | 8.19ft in | 2495mm |
| Wheelbase | 6.24ft in | 1900mm |
| Reach At Max Lift And Dump | 2.78ft in | 845mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.