Specification sheet Wheel Loader Ref tcm-l4-2-wheel-loader
TCM L4-2
The TCM L4-2 is a wheel loader with an operating weight of 5,831.23 lb (2,645 kg), a 28.6 hp engine, and a 0.53 yd³ (0.4 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
5,831.23lb
2,645kg
Engine power
28.6hp
21.3kW
Net Power Bucket capacity
0.53yd³
0.4m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the TCM L4-2 sits at the compact end of its class:
- Operating weight 5,830 lb lighter than 94% (n=374)
- Engine power 29 hp less powerful than 96% (n=367)
- Bucket capacity 0.5 yd³ smaller-bucket than 96% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2334 | |
|---|---|---|
| Engine Model | D1503-DI-T-K2A | |
| Net Power | 28.6hp | 21.3kw |
02 Operational Specification
| Operating Weight | 5831.3lb | 2645kg |
|---|---|---|
| Fuel Capacity | 13.3gal | 50L |
| Static Tipping Weight | 3626.7lb | 1645kg |
| Tire Size | 12.5/60-18-8PR L2 |
03 Transmission Specification
| Transmission Type | powershift | |
|---|---|---|
| Max Speed - Forward | 9.4mph | 15km/h |
| Max Speed - Reverse | 9.4mph | 15km/h |
04 Bucket Dimensions
| Dump Clearance At Max Raise | 7.08ft in | 2155mm |
|---|---|---|
| Breakout Force | _- | 27.5kN |
| Bucket Capacity - Heaped | 0.53yd3 | 0.4m3 |
| Bucket Width | 5.55ft in | 1690mm |
05 Dimensions Dimensions
| Ground Clearance | 0.84ft in | 255mm |
|---|---|---|
| Length With Bucket On Ground | 13.59ft in | 4140mm |
| Height To Top Of Cab | 8.03ft in | 2445mm |
| Wheelbase | 5.58ft in | 1700mm |
| Reach At Max Lift And Dump | 2.68ft in | 815mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.