Specification sheet Wheel Loader Ref tcm-l3-2-wheel-loader
TCM L3-2
The TCM L3-2 is a wheel loader with an operating weight of 4,221.86 lb (1,915 kg), a 21.8 hp engine, and a 0.4 yd³ (0.3 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
4,221.86lb
1,915kg
Engine power
21.8hp
16.2kW
Net Power Bucket capacity
0.4yd³
0.3m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the TCM L3-2 sits at the compact end of its class:
- Operating weight 4,220 lb lighter than 98% (n=374)
- Engine power 22 hp less powerful than 100% (n=367)
- Bucket capacity 0.4 yd³ smaller-bucket than 99% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2334 | |
|---|---|---|
| Engine Model | D1105-K2A | |
| Net Power | 21.8hp | 16.2kw |
02 Operational Specification
| Operating Weight | 4221.9lb | 1915kg |
|---|---|---|
| Fuel Capacity | 8.8gal | 33L |
| Static Tipping Weight | 2976.3lb | 1350kg |
| Tire Size | 10-16, 70-16 -6PRL2 |
03 Transmission Specification
| Transmission Type | powershift | |
|---|---|---|
| Max Speed - Forward | 9.4mph | 15km/h |
| Max Speed - Reverse | 9.4mph | 15km/h |
04 Bucket Dimensions
| Dump Clearance At Max Raise | 6.07ft in | 1850mm |
|---|---|---|
| Bucket Capacity - Heaped | 0.4yd3 | 0.3m3 |
| Bucket Width | 4.43ft in | 1350mm |
| Breakout Force | _- | 20.6kN |
05 Dimensions Dimensions
| Length With Bucket On Ground | 11.29ft in | 3440mm |
|---|---|---|
| Height To Top Of Cab | 7.71ft in | 2350mm |
| Wheelbase | 4.93ft in | 1500mm |
| Reach At Max Lift And Dump | 1.88ft in | 570mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.