Specification sheet Wheel Loader Ref tcm-l20-wheel-loader
TCM L20
The TCM L20 is a wheel loader with an operating weight of 20,921.87 lb (9,490 kg), a 128.8 hp engine, and a 2.62 yd³ (2 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
20,921.87lb
9,490kg
Engine power
128.8hp
96kW
Net Power Bucket capacity
2.62yd³
2m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the TCM L20 sits at the heavy end of its class:
- Operating weight 20,920 lb heavier than 94% (n=374)
- Engine power 129 hp more powerful than 98% (n=367)
- Bucket capacity 2.6 yd³ larger-bucket than 95% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2353 | |
|---|---|---|
| Engine Model | BB-6BG1T | |
| Net Power | 128.8hp | 96kw |
02 Operational Specification
| Operating Weight | 20921.9lb | 9490kg |
|---|---|---|
| Fuel Capacity | 45gal | 170L |
| Static Tipping Weight | 16226.1lb | 7360kg |
| Tire Size | 17.5-25-12PRL-3 |
03 Transmission Specification
| Transmission Type | Hydrostatic | |
|---|---|---|
| Max Speed - Forward | 21.5mph | 34.5km/h |
| Max Speed - Reverse | 21.5mph | 34.5km/h |
04 Bucket Dimensions
| Dump Clearance At Max Raise | 9.06ft in | 2760mm |
|---|---|---|
| Bucket Capacity - Heaped | 2.62yd3 | 2m3 |
| Breakout Force | _- | 98kN |
05 Dimensions Dimensions
| Ground Clearance | 1.32ft in | 400mm |
|---|---|---|
| Length With Bucket On Ground | 22.15ft in | 6750mm |
| Height To Top Of Cab | 10.31ft in | 3140mm |
| Wheelbase | 9.52ft in | 2900mm |
| Reach At Max Lift And Dump | 3.52ft in | 1070mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.