Specification sheet Wheel Loader Ref tcm-840-wheel-loader
TCM 840
The TCM 840 is a wheel loader with an operating weight of 21,803.72 lb (9,890 kg), a 123 hp engine, and a 3.14 yd³ (2.4 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
21,803.72lb
9,890kg
Engine power
123hp
91.8kW
Net Power Bucket capacity
3.14yd³
2.4m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the TCM 840 sits at the heavy end of its class:
- Operating weight 21,800 lb heavier than 99% (n=374)
- Engine power 123 hp more powerful than 95% (n=367)
- Bucket capacity 3.1 yd³ larger-bucket than 97% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2353 | |
| Engine Model | 6BDIT | |
| Net Power | 123hp | 91.8kw |
| Power Measured @ | 2200rpm | |
| Max Torque | 329lb ft | 446.1Nm |
| Torque Measured @ | 1600rpm | |
| Aspiration | turbocharged |
02 Operational Specification
| Operating Weight | 21803.8lb | 9890kg |
|---|---|---|
| Fuel Capacity | 45gal | 170L |
| Hydraulic System Fluid Capacity | 21.2gal | 80L |
| Engine Oil Fluid Capacity | 2.7gal | 10L |
| Cooling System Fluid Capacity | 10.9gal | 41L |
| Transmission Fluid Capacity | 5.3gal | 20L |
| Front Axle/Diff Fluid Capacity | 9gal | 34L |
| Rear Axle/Diff Fluid Capacity | 9gal | 34L |
| Static Tipping Weight | 17747.3lb | 8050kg |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 25amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 17.5-25-12PR L2 |
03 Transmission Specification
| Transmission Type | countershaft type full powershift | |
|---|---|---|
| Number Of Forward Gears | 3 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 21.7mph | 34.8km/h |
| Max Speed - Reverse | 21.7mph | 34.8km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2700psi | 18615.9kPa |
|---|---|---|
| Pump Flow Capacity | 48.7gal/min | 184L/min |
| Raise Time | 6sec | |
| Dump Time | 1.5sec | |
| Lower Time | 3sec | |
| Pump Type | closed and pressurized |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.19ft in | 2800mm |
|---|---|---|
| Bucket Capacity - Heaped | 3.14yd3 | 2.4m3 |
| Bucket Capacity - Struck | 2.62yd3 | 2m3 |
| Bucket Width | 8.14ft in | 2480mm |
| Breakout Force | 23590lb | 104.94kN |
06 Dimensions Dimensions
| Ground Clearance | 1.22ft in | 370mm |
|---|---|---|
| Length With Bucket On Ground | 21.76ft in | 6630mm |
| Width Over Tires | 7.91ft in | 2410mm |
| Height To Top Of Cab | 10.47ft in | 3190mm |
| Wheelbase | 9.52ft in | 2900mm |
| Hinge Pin - Max Height | 12.14ft in | 3700mm |
| Reach At Max Lift And Dump | 3.48ft in | 1060mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.