Tata Hitachi EX40
The Tata Hitachi EX40 is a mini excavator with an operating weight of 9,039 lb, a 40 hp engine, and a dig depth of 11.11 ft.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the Tata Hitachi EX40 sits above the median for its class:
- Operating weight 9,040 lb heavier than 82% (n=438)
- Engine power 40 hp more powerful than 84% (n=448)
- Dig depth 11.1 ft deeper-digging than 79% (n=426)
01 Boom/Stick Option (Hex) 1 Specification
| Shipping Length Of Unit | 17.82ft in | 5,432mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Cutting Height | 19.05ft in | 5,806mm‖ — metric converted from the published imperial value |
| Shipping Height Of Unit | 8.27ft in | 2,521mm‖ — metric converted from the published imperial value |
| Max Loading Height | 13.51ft in | 4,118mm‖ — metric converted from the published imperial value |
| Max Vertical Wall Digging Depth | 8.81ft in | 2,685mm‖ — metric converted from the published imperial value |
| Max Digging Depth | 11.11ft in | 3,386mm‖ — metric converted from the published imperial value |
| Boom/Stick Option (Hex) 1 | Boom 2730mm/Stick 1460mm |
02 Dimensions Specification
| Width To Outside Of Tracks | 6.07ft in | 1,850mm‖ — metric converted from the published imperial value |
|---|---|---|
| Length Of Track On Ground | 6.34ft in | 1,932mm‖ — metric converted from the published imperial value |
| Ground Clearance | 1.2ft in | 366mm‖ — metric converted from the published imperial value |
| Height To Top Of Cab | 8.27ft in | 2,521mm‖ — metric converted from the published imperial value |
| Tail Swing Radius | 4.75ft in | 1,448mm‖ — metric converted from the published imperial value |
| Removal Counterweight Clearance | 2.09ft in | 637mm‖ — metric converted from the published imperial value |
03 Undercarriage Specification
| Shoe Size | 15.75in | 400mm‖ — metric converted from the published imperial value |
|---|---|---|
| Track Gauge | 4.76ft in | 1,451mm‖ — metric converted from the published imperial value |
| Max Travel Speed | 2.8mph | 4.5km/h‖ — metric converted from the published imperial value |
| Ground Pressure | 3.55psi | 24.5kpa‖ — metric converted from the published imperial value |
| Number Of Carrier Rollers Per Side | 1 | |
| Number Of Track Rollers Per Side | 4 |
04 Engine Specification
| Engine Model | TATA 4SP | |
|---|---|---|
| Net Power | 40hp | 30kw‖ — metric converted from the published imperial value |
| Power Measured @ | 2100rpm | |
| Max Torque | 122.9lb ft |
05 Operational Specification
| Operating Weight | 9039lb | 4,100kg‖ — metric converted from the published imperial value |
|---|---|---|
| Fuel Capacity | 14.6gal | 55.3l‖ — metric converted from the published imperial value |
| Cooling System Fluid Capacity | 2gal | 8l‖ — metric converted from the published imperial value |
| Hydraulic System Fluid Capacity | 16.4gal | 62.1l‖ — metric converted from the published imperial value |
| Engine Oil Capacity | 1.6gal | 6.1l‖ — metric converted from the published imperial value |
| Hydraulic System Relief Valve Pressure | 3840.3psi | 26,478kpa‖ — metric converted from the published imperial value |
| Hydraulic Pump Flow Capacity | 2.8gal/min | 11l/min‖ — metric converted from the published imperial value |
06 Swing Mechanism Specification
| Swing Speed | 10rpm |
|---|
07 Buckets Specification
| Reference Bucket Capacity | 0.2yd3 | |
|---|---|---|
| Minimum Bucket Capacity | 0.2yd3 | |
| Maximum Bucket Capacity | 0.2yd3 |
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.