Specification sheet Wheel Loader Ref takeuchi-tw80-wheel-loader

Takeuchi TW80

The Takeuchi TW80 is a wheel loader with an operating weight of 12,677 lb (5,750.2 kg), a 73 hp engine, and a 1.3 yd³ (1 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
12,677lb
5,750.2kg
Engine power
73hp
54.44kW
Gross Power
Bucket capacity
1.3yd³
1m³

Where it sits in its classpercentile · compact wheel loaders

Among 374 compact wheel loaders (≤22,000 lb), the Takeuchi TW80 sits in the middle of its class:

  • Operating weight 12,680 lb heavier than 51% (n=374)
  • Engine power 73 hp more powerful than 51% (n=367)
  • Bucket capacity 1.3 yd³ smaller-bucket than 57% (n=309)

Scale drawingdrawn to scale · mm

2606B478C66928A
Side elevation
2606B2050D
Front elevation

01 Engine Specification

Number Of Cylinders 4
Engine Make 2349
Engine Model BF4L 2011
Gross Power 73hp 54.5kw
Power Measured @ 2300rpm
Max Torque 170lb ft 230.5Nm
Displacement 189.8cu in 3.2L
Torque Measured @ 1600rpm

02 Operational Specification

Operating Weight 12677lb 5750.2kg
Fuel Capacity 26.4gal 100L
Hydraulic System Fluid Capacity 19.8gal 75L
Engine Oil Fluid Capacity 2.8gal 10.5L
Static Tipping Weight 9420lb 4272.9kg
Operating Voltage 12V
Alternator Supplied Amperage 80amps
Rear Axle Oscillation 24degrees
Tire Size Heavy Duty - 15-19.5 12-ply

03 Transmission Specification

Transmission Type Hydrostatic
Max Speed - Forward 12.4mph 20km/h

04 Hydraulic System Specification

Relief Valve Setting 3263psi 22497.6kPa
Pump Flow Capacity 19.8gal/min 75L/min
Raise Time 6sec
Dump Time 1.2sec
Lower Time 4.1sec

05 Bucket Dimensions

Dump Clearance At Max Raise 102.5ft in 31242mm
Bucket Capacity - Heaped 1.3yd3 1m3
Bucket Width 81.42ft in 24816.82mm
Breakout Force 15287lb 68kN

06 Dimensions Dimensions

Ground Clearance 1.57ft in 477.54mm
Length With Bucket On Ground 219.58ft in 66927.99mm
Width Over Tires 6.73ft in 2049.79mm
Height To Top Of Cab 8.56ft in 2606.04mm
Wheelbase 7.15ft in 2179.33mm
Hinge Pin - Max Height 11.1ft in 3380.76mm
Reach At Max Lift And Dump 2.43ft in 739.14mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.