Specification sheet Wheel Loader Ref takeuchi-tw65-wheel-loader

Takeuchi TW65

The Takeuchi TW65 is a wheel loader with an operating weight of 10,362 lb (4,700.13 kg), a 59 hp engine, and a 1.12 yd³ (0.84 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
10,362lb
4,700.13kg
Engine power
59hp
44kW
Gross Power
Bucket capacity
1.12yd³
0.84m³

Where it sits in its classpercentile · compact wheel loaders

Among 374 compact wheel loaders (≤22,000 lb), the Takeuchi TW65 sits below the median for its class:

  • Operating weight 10,360 lb lighter than 70% (n=374)
  • Engine power 59 hp less powerful than 68% (n=367)
  • Bucket capacity 1.1 yd³ smaller-bucket than 66% (n=309)

Scale drawingdrawn to scale · mm

2649B450C5229A
Side elevation
2649B1869D
Front elevation

01 Engine Specification

Number Of Cylinders 4
Engine Make 2349
Engine Model F4L 2011
Gross Power 59hp 44kw
Power Measured @ 2300rpm
Max Torque 140lb ft 189.9Nm
Displacement 189.8cu in 3.2L
Torque Measured @ 1700rpm

02 Operational Specification

Operating Weight 10362lb 4700.2kg
Fuel Capacity 26.4gal 100L
Hydraulic System Fluid Capacity 13.7gal 51.9L
Engine Oil Fluid Capacity 2.8gal 10.5L
Static Tipping Weight 8073lb 3661.9kg
Operating Voltage 12V
Alternator Supplied Amperage 60amps
Rear Axle Oscillation 24degrees
Tire Size Heavy Duty - 15-19.5 12-ply

03 Transmission Specification

Transmission Type Hydrostatic
Max Speed - Forward 12.4mph -km/h
Max Speed - Reverse 12.4mph -km/h

04 Hydraulic System Specification

Relief Valve Setting 3336psi 23000.9kPa
Pump Flow Capacity 15.3gal/min 58L/min
Raise Time 5.5sec
Dump Time 1.7sec
Lower Time 3.5sec

05 Bucket Dimensions

Dump Clearance At Max Raise 8.2ft in 2499mm
Bucket Capacity - Heaped 1.12yd3 0.84m3
Bucket Width 5.91ft in 1803mm
Breakout Force 11600lb 51.6kN

06 Dimensions Dimensions

Ground Clearance 1.48ft in 449.58mm
Length With Bucket On Ground 17.15ft in 5229mm
Width Over Tires 6.14ft in 1869.43mm
Height To Top Of Cab 8.69ft in 2649mm
Wheelbase 6.56ft in 1998.97mm
Hinge Pin - Max Height 10.4ft in 3169.92mm
Reach At Max Lift And Dump 2.5ft in 762mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.