Specification sheet Compact Track Loader Ref takeuchi-tl250-multi-terrain-loader
Takeuchi TL250
The Takeuchi TL250 is a compact track loader with an operating weight of 11,904.97 lb (5,400 kg), a 92 hp engine, a rated operating capacity of 2,407.45 lb (1,092 kg), and a 1 yd³ (0.7 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
11,904.97lb
5,400kg
Engine power
92hp
68.61kW
Net Power Rated operating capacity
2,407.45lb
1,092kg
Bucket capacity
1yd³
0.7m³
◆Where it sits in its classpercentile · compact track loaders
Among 184 compact track loaders , the Takeuchi TL250 sits at the heavy end of its class:
- Operating weight 11,900 lb heavier than 95% (n=182)
- Engine power 92 hp more powerful than 85% (n=167)
- Rated operating capacity 2,410 lb lower-rated than 58% (n=156)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2334 | |
| Engine Model | V3800DI | |
| Gross Power | 98hp | 73.1kw |
| Net Power | 92hp | 68.7kw |
| Power Measured @ | 2600rpm | |
| Peak Torque | 240lb ft | 325.4Nm |
| Torque Measured @ | 1600rpm | |
| Displacement | 230cu in | 3.8L |
| Aspiration | Turbocharged |
02 Operational Specification
| Operating Weight | 11905lb | 5400kg |
|---|---|---|
| Cooling System Fluid Capacity | 4.4gal | 16.5L |
| Fuel Capacity | 28.6gal | 108L |
| Engine Oil Capacity | 3.5gal | 13.2L |
| Hydraulic System Fluid Capacity | 17.2gal | 65L |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 80amps | |
| Max Speed - Low Range | 4.9mph | 7.8km/h |
| Max Speed - High Range | 7.5mph | 12km/h |
03 Loader Specification
| Operating Load | 2407.5lb | 1092kg |
|---|---|---|
| Bucket Capacity | 1yd3 | 0.7m3 |
04 Hydraulic Specification
| Pump Flow | 23.5gal/min | 88.7L/min |
|---|---|---|
| Relief Valve Pressure | 3000psi | 20684.3kPa |
05 Dimensions Dimensions
| Width Over Tracks | 6.11ft in | 1860mm |
|---|---|---|
| Height To Top Of Cab | 7.62ft in | 2320mm |
| Ground Clearance | 13.59in | 345mm |
| Clearance At Max Lift And Dump | 7.98ft in | 2430mm |
| Reach At Max Lift And Dump | 3.24ft in | 985mm |
| Turning Radius From Center - Inc Bucket | 95.87in | 2435mm |
| Length With Bucket | 13.25ft in | 4038mm |
| Turning Radius From Center - Machine Rear | 69.1in | 1755mm |
06 Undercarriage Dimensions
| Length Of Track On Ground | 5.25ft in | 1598mm |
|---|---|---|
| Number Of Track Rollers Per Side | 6 | |
| Width Of Track | 17.72in | 450mm |
| Ground Pressure | 4.8psi | 33.1kPa |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.