Specification sheet Compact Track Loader Ref takeuchi-tl240-multi-terrain-loader
Takeuchi TL240
The Takeuchi TL240 is a compact track loader with an operating weight of 10,363.94 lb (4,701 kg), a 83 hp engine, a rated operating capacity of 2,081.17 lb (944 kg), and a 0.8 yd³ (0.6 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
10,363.94lb
4,701kg
Engine power
83hp
61.9kW
Net Power Rated operating capacity
2,081.17lb
944kg
Bucket capacity
0.8yd³
0.6m³
◆Where it sits in its classpercentile · compact track loaders
Among 184 compact track loaders , the Takeuchi TL240 sits above the median for its class:
- Operating weight 10,360 lb heavier than 76% (n=182)
- Engine power 83 hp more powerful than 72% (n=167)
- Rated operating capacity 2,080 lb lower-rated than 72% (n=156)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2348 | |
| Engine Model | 4TNV98I | |
| Gross Power | 86hp | 64.2kw |
| Net Power | 83hp | 61.9kw |
| Power Measured @ | 2500rpm | |
| Peak Torque | 219lb ft | 297Nm |
| Torque Measured @ | 1850rpm | |
| Displacement | 203cu in | 3.4L |
| Aspiration | Turbocharged |
02 Operational Specification
| Operating Weight | 10364lb | 4701kg |
|---|---|---|
| Cooling System Fluid Capacity | 4.4gal | 16.5L |
| Fuel Capacity | 23.8gal | 90L |
| Engine Oil Capacity | 2.7gal | 10.2L |
| Hydraulic System Fluid Capacity | 19.9gal | 75L |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 40amps | |
| Max Speed - Low Range | 4.8mph | 7.6km/h |
| Max Speed - High Range | 7.3mph | 11.6km/h |
03 Loader Specification
| Operating Load | 2081.2lb | 944kg |
|---|---|---|
| Bucket Capacity | 0.8yd3 | 0.6m3 |
04 Hydraulic Specification
| Pump Flow | 20.1gal/min | 76L/min |
|---|---|---|
| Relief Valve Pressure | 3000psi | 20684.3kPa |
05 Dimensions Dimensions
| Width Over Tracks | 5.81ft in | 1770mm |
|---|---|---|
| Height To Top Of Cab | 7.45ft in | 2270mm |
| Ground Clearance | 12.8in | 325mm |
| Clearance At Max Lift And Dump | 7.91ft in | 2408mm |
| Reach At Max Lift And Dump | 2.88ft in | 875mm |
| Turning Radius From Center - Inc Bucket | 93in | 2362mm |
| Length With Bucket | 12.5ft in | 3810mm |
| Turning Radius From Center - Machine Rear | 65.75in | 1670mm |
06 Undercarriage Dimensions
| Length Of Track On Ground | 4.91ft in | 1495mm |
|---|---|---|
| Number Of Track Rollers Per Side | 5 | |
| Width Of Track | 17.72in | 450mm |
| Ground Pressure | 4.41psi | 30.34kPa |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.