Specification sheet Compact Track Loader Ref takeuchi-tl230-series-2-multi-terrain-loader
Takeuchi TL230 Series 2
The Takeuchi TL230 Series 2 is a compact track loader with an operating weight of 8,609.06 lb (3,905 kg), a 68.41 hp engine, a rated operating capacity of 1,884.96 lb (855 kg), and a 0.6 yd³ (0.4 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
8,609.06lb
3,905kg
Engine power
68.41hp
51.01kW
Net Power Rated operating capacity
1,884.96lb
855kg
Bucket capacity
0.6yd³
0.4m³
◆Where it sits in its classpercentile · compact track loaders
Among 184 compact track loaders , the Takeuchi TL230 Series 2 sits below the median for its class:
- Operating weight 8,610 lb lighter than 62% (n=182)
- Engine power 68 hp less powerful than 66% (n=167)
- Rated operating capacity 1,880 lb lower-rated than 85% (n=156)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2334 | |
| Engine Model | V3307D1 | |
| Gross Power | 71hp | 53kw |
| Net Power | 68.4hp | 51.1kw |
| Power Measured @ | 2500rpm | |
| Peak Torque | 182lb ft | 246.8Nm |
| Torque Measured @ | 1600rpm | |
| Displacement | 203cu in | 3.4L |
| Aspiration | Turbocharged |
02 Operational Specification
| Operating Weight | 8609.1lb | 3905kg |
|---|---|---|
| Cooling System Fluid Capacity | 3.5gal | 13L |
| Engine Oil Capacity | 3.2gal | 11.8L |
| Fuel Capacity | 19.9gal | 75L |
| Hydraulic System Fluid Capacity | 15.4gal | 58L |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 60amps | |
| Max Speed - Low Range | 4.6mph | 7.4km/h |
| Max Speed - High Range | 6.9mph | 11km/h |
03 Loader Specification
| Operating Load | 1885lb | 855kg |
|---|---|---|
| Bucket Capacity | 0.6yd3 | 0.4m3 |
04 Hydraulic Specification
| Relief Valve Pressure | 3000psi | 20684.3kPa |
|---|
05 Dimensions Dimensions
| Width Over Tracks | 5.19ft in | 1580mm |
|---|---|---|
| Height To Top Of Cab | 7.34ft in | 2235mm |
| Ground Clearance | 12.21in | 310mm |
| Clearance At Max Lift And Dump | 7.78ft in | 2370mm |
| Reach At Max Lift And Dump | 2.4ft in | 730mm |
| Turning Radius From Center - Inc Bucket | 82.8in | 2103mm |
| Length With Bucket | 11.42ft in | 3480mm |
| Turning Radius From Center - Machine Rear | 62.6in | 1590mm |
06 Undercarriage Dimensions
| Length Of Track On Ground | 4.57ft in | 1390mm |
|---|---|---|
| Number Of Track Rollers Per Side | 5 | |
| Width Of Track | 12.6in | 320mm |
| Ground Pressure | 5.6psi | 38.62kPa |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.