Specification sheet Compact Track Loader Ref takeuchi-tl220-multi-terrain-loader
Takeuchi TL220
The Takeuchi TL220 is a compact track loader with an operating weight of 14,330.05 lb (6,500 kg), a 51.2 hp engine, a rated operating capacity of 1,245.62 lb (565 kg), and a 0.5 yd³ (0.4 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
14,330.05lb
6,500kg
Engine power
51.2hp
38.18kW
Net Power Rated operating capacity
1,245.62lb
565kg
Bucket capacity
0.5yd³
0.4m³
◆Where it sits in its classpercentile · compact track loaders
Among 184 compact track loaders , the Takeuchi TL220 sits at the heavy end of its class:
- Operating weight 14,330 lb heavier than 97% (n=182)
- Engine power 51 hp less powerful than 89% (n=167)
- Rated operating capacity 1,250 lb lower-rated than 92% (n=156)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2348 | |
| Engine Model | 4TNV84 | |
| Gross Power | 53.5hp | 39.9kw |
| Net Power | 51.2hp | 38.2kw |
| Power Measured @ | 2800rpm | |
| Peak Torque | 120lb ft | 162.7Nm |
| Torque Measured @ | 2000rpm | |
| Displacement | 121.7cu in | 2L |
| Aspiration | Turbocharged |
02 Operational Specification
| Operating Weight | 14330.1lb | 6500kg |
|---|---|---|
| Cooling System Fluid Capacity | 3gal | 11L |
| Fuel Capacity | 15.1gal | 57L |
| Engine Oil Capacity | 2gal | 7.4L |
| Hydraulic System Fluid Capacity | 11.9gal | 45L |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 40amps | |
| Max Speed - Low Range | 4.1mph | 6.5km/h |
| Max Speed - High Range | 5.8mph | 9.3km/h |
03 Loader Specification
| Operating Load | 1245.7lb | 565kg |
|---|---|---|
| Bucket Capacity | 0.5yd3 | 0.4m3 |
04 Hydraulic Specification
| Pump Flow | 15.1gal/min | 57L/min |
|---|---|---|
| Relief Valve Pressure | 3000psi | 20684.3kPa |
05 Dimensions Dimensions
| Width Over Tracks | 4.83ft in | 1470mm |
|---|---|---|
| Height To Top Of Cab | 6.47ft in | 1970mm |
| Ground Clearance | 9.85in | 250mm |
| Clearance At Max Lift And Dump | 7.47ft in | 2275mm |
| Reach At Max Lift And Dump | 1.94ft in | 590mm |
| Turning Radius From Center - Inc Bucket | 78.59in | 1996mm |
| Length With Bucket | 10.67ft in | 3251mm |
| Turning Radius From Center - Machine Rear | 57.88in | 1470mm |
06 Undercarriage Dimensions
| Length Of Track On Ground | 4.07ft in | 1240mm |
|---|---|---|
| Number Of Track Rollers Per Side | 4 | |
| Width Of Track | 11.82in | 300mm |
| Ground Pressure | 5psi | 34.48kPa |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.