Specification sheet Compact Track Loader Ref takeuchi-tl216-multi-terrain-loader

Takeuchi TL216

The Takeuchi TL216 is a compact track loader with an operating weight of 6,813 lb (3,090.33 kg), a 61 hp engine, and a rated operating capacity of 1,310 lb (594.21 kg).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
6,813lb
3,090.33kg
Engine power
61hp
45.5kW
Gross Power
Rated operating capacity
1,310lb
594.21kg

Where it sits in its classpercentile · compact track loaders

Among 184 compact track loaders , the Takeuchi TL216 sits below the median for its class:

  • Operating weight 6,810 lb lighter than 85% (n=182)
  • Engine power 61 hp less powerful than 77% (n=167)
  • Rated operating capacity 1,310 lb lower-rated than 91% (n=156)

Scale drawingdrawn to scale · mm

2017B274C3312A1156D
Side elevation
2017B1529E
Front elevation

01 Engine Specification

Number Of Cylinders 4
Engine Make 2353
Engine Model 4JB1
Gross Power 61hp 45.5kw
Power Measured @ 2600rpm
Displacement 169cu in 2.8L

02 Operational Specification

Operating Weight 6813lb 3090.4kg
Fuel Capacity 15.6gal 59.1L
Hydraulic System Fluid Capacity 13.2gal 50L

03 Loader Specification

Breakout Force 4930lb 2236.3kg
Operating Load 1310lb 594.3kg

04 Hydraulic Specification

Pump Flow 18gal/min 68.2L/min
Relief Valve Pressure 2276psi 15692.5kPa

05 Dimensions Dimensions

Width Over Tracks 5.02ft in 1529.09mm
Height To Top Of Cab 6.62ft in 2016.77mm
Ground Clearance 10.8in 274.32mm
Clearance At Max Lift And Dump 7.82ft in 2382.53mm
Reach At Max Lift And Dump 2.32ft in 706.13mm
Length With Bucket 10.87ft in 3312.17mm
Turning Radius From Center - Inc Bucket 6.75in 171.45mm
Turning Radius From Center - Machine Rear 4.93in 125.1mm

06 Undercarriage Dimensions

Length Of Track On Ground 3.8ft in 1155.7mm
Number Of Track Rollers Per Side 5
Ground Pressure 5.8psi 39.99kPa

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.