Specification sheet Compact Track Loader Ref takeuchi-tl120-multi-terrain-loader
Takeuchi TL120
The Takeuchi TL120 is a compact track loader with an operating weight of 5,952 lb (2,699.79 kg), a 52 hp engine, and a rated operating capacity of 1,246 lb (565.18 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
5,952lb
2,699.79kg
Engine power
52hp
38.8kW
Gross Power Rated operating capacity
1,246lb
565.18kg
◆Where it sits in its classpercentile · compact track loaders
Among 184 compact track loaders , the Takeuchi TL120 sits at the compact end of its class:
- Operating weight 5,950 lb lighter than 92% (n=182)
- Engine power 52 hp less powerful than 89% (n=167)
- Rated operating capacity 1,250 lb lower-rated than 92% (n=156)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2348 | |
| Engine Model | 4TNV84T | |
| Gross Power | 52hp | 38.8kw |
| Power Measured @ | 2800rpm | |
| Peak Torque | 123lb ft | 166.8Nm |
| Torque Measured @ | 1680rpm | |
| Displacement | 119.3cu in | 2L |
02 Operational Specification
| Operating Weight | 5952lb | 2699.8kg |
|---|---|---|
| Cooling System Fluid Capacity | 2.9gal | 11L |
| Fuel Capacity | 15.3gal | 58L |
| Engine Oil Capacity | 2gal | 7.4L |
| Hydraulic System Fluid Capacity | 7.8gal | 29.2L |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 40amps | |
| Max Speed - Low Range | 4mph | 6.5km/h |
| Max Speed - High Range | 5.8mph | 9.4km/h |
03 Loader Specification
| Operating Load | 1246lb | 565.2kg |
|---|
04 Hydraulic Specification
| Pump Flow | 15.1gal/min | 57.2L/min |
|---|---|---|
| Relief Valve Pressure | 3000psi | 20684.3kPa |
05 Dimensions Dimensions
| Width Over Tracks | 4.83ft in | 1470.66mm |
|---|---|---|
| Height To Top Of Cab | 6.47ft in | 1971.06mm |
| Ground Clearance | 0.82in | 20.75mm |
| Clearance At Max Lift And Dump | 9.54ft in | 2905.75mm |
| Reach At Max Lift And Dump | 1.93ft in | 586.74mm |
| Turning Radius From Center - Inc Bucket | 81in | 2057.4mm |
| Length With Bucket | 10.57ft in | 3220.74mm |
| Turning Radius From Center - Machine Rear | 59.1in | 1501.14mm |
06 Undercarriage Dimensions
| Length Of Track On Ground | 4.08ft in | 1242.06mm |
|---|---|---|
| Number Of Track Rollers Per Side | 4 | |
| Width Of Track | 11.67in | 296.42mm |
| Ground Pressure | 4.6psi | 31.72kPa |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.