Takeuchi TL10
The Takeuchi TL10 is a compact track loader with an operating weight of 10,516.05 lb (4,770 kg), a rated operating capacity of 2,403.04 lb (1,090 kg), and a tipping load of 3,434.9 lb (1,558 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →◆Where it sits in its classpercentile · compact track loaders
Among 184 compact track loaders , the Takeuchi TL10 sits above the median for its class:
- Operating weight 10,520 lb heavier than 79% (n=182)
- Rated operating capacity 2,400 lb lower-rated than 58% (n=156)
Not positioned on engine power — withheld or unpublished for this machine.
01 Engine Specification
| Horsepower - Gross | 92hp | 68.7kw |
|---|---|---|
| Engine Make | Kubato | |
| Engine Model | V3800CR | |
| Power Measured @ | 2400rpm | |
| Peak Torque | 247.1lb ft | 335Nm |
| Torque Measured @ | 1500rpm | |
| Displacement | 230cu in | 3.8L |
02 Operational Specification
| Operating Weight | 10516.1lb | 4770kg |
|---|---|---|
| Cooling System Fluid Capacity | 4.1gal | 15.5L |
| Engine Oil Capacity | 3.5gal | 13.2L |
| Fuel Capacity | 23.8gal | 90L |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 80amps | |
| Traction Force | 11060lb | 49.2kN |
| Max Speed - Low Range | 4.6mph | 7.5km/h |
| Max Speed - High Range | 7.2mph | 11.6km/h |
03 Loader Specification
| Breakout Force | 7425.2lb | 3368kg |
|---|---|---|
| Tipping Load | 3434.9lb | 1558kg |
| Operating Load | 2403.1lb | 1090kg |
| Bucket Breakout Force | 7400lb | 33kN |
04 Hydraulic Specification
| Hydraulic Reservoir | 12.7gal | 48.1L |
|---|---|---|
| System Capacity | 19.5gal/min | 73.9L/min |
| Auxiliary Hydraulic Flow | 20gal/min | 75.8L/min |
| Relief Valve Pressure | 3045.8psi | 21000kPa |
05 Undercarriage Dimensions
| Ground Pressure | 4.5psi | 31.03kPa |
|---|
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.