Takeuchi TB23R
The Takeuchi TB23R is a mini excavator with an operating weight of 5,732.1 lb, a 18.7 hp engine, and a dig depth of 8.4 ft.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the Takeuchi TB23R sits below the median for its class:
- Operating weight 5,730 lb lighter than 63% (n=438)
- Engine power 19 hp less powerful than 71% (n=448)
- Dig depth 8.4 ft shallower-digging than 61% (n=426)
01 Boom/Stick Option (Hex) 1 Specification
| Shipping Length Of Unit | 12.88ft in | 3,926mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Cutting Height | 13.77ft in | 4,197mm‖ — metric converted from the published imperial value |
| Shipping Height Of Unit | 8.04ft in | 2,451mm‖ — metric converted from the published imperial value |
| Max Loading Height | 8.67ft in | 2,643mm‖ — metric converted from the published imperial value |
| Max Reach Along Ground | 14.29ft in | 4,356mm‖ — metric converted from the published imperial value |
| Max Vertical Wall Digging Depth | 7.12ft in | 2,170mm‖ — metric converted from the published imperial value |
| Max Digging Depth | 8.4ft in | 2,560mm‖ — metric converted from the published imperial value |
02 Dimensions Specification
| Width To Outside Of Tracks | 4.6ft in | 1,402mm‖ — metric converted from the published imperial value |
|---|---|---|
| Length Of Track On Ground | 4.7ft in | 1,433mm‖ — metric converted from the published imperial value |
| Ground Clearance | 0.87ft in | 265mm‖ — metric converted from the published imperial value |
| Height To Top Of Cab | 8.04ft in | 2,451mm‖ — metric converted from the published imperial value |
| Tail Swing Radius | 2.7ft in | 823mm‖ — metric converted from the published imperial value |
| Removal Counterweight Clearance | 1.65ft in | 503mm‖ — metric converted from the published imperial value |
03 Undercarriage Specification
| Shoe Size | 9.85in | 250mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Travel Speed | 2.61mph | 4.2km/h‖ — metric converted from the published imperial value |
| Ground Pressure | 4.83psi | 33.3kpa‖ — metric converted from the published imperial value |
04 Engine Specification
| Engine Make | 2348 | |
|---|---|---|
| Engine Model | 3TNV76 | |
| Net Power | 18.7hp | 13.9kw‖ — metric converted from the published imperial value |
| Power Measured @ | 2300rpm | |
| Displacement | 204.2cu in | 3,346cm3‖ — metric converted from the published imperial value |
| Max Torque | 50.3lb ft |
05 Operational Specification
| Operating Weight | 5732.1lb | 2,600kg‖ — metric converted from the published imperial value |
|---|---|---|
| Fuel Capacity | 8gal | 30l‖ — metric converted from the published imperial value |
| Cooling System Fluid Capacity | 1gal | 4l‖ — metric converted from the published imperial value |
| Hydraulic System Fluid Capacity | 10.1gal | 38.2l‖ — metric converted from the published imperial value |
| Engine Oil Capacity | 0.9gal | 3l‖ — metric converted from the published imperial value |
| Operational Voltage | 12V | |
| Hydraulic System Relief Valve Pressure | 3045.8psi | 21,000kpa‖ — metric converted from the published imperial value |
| Hydraulic Pump Flow Capacity | 18.6gal/min | 70.4l/min‖ — metric converted from the published imperial value |
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.