Takeuchi TB135
The Takeuchi TB135 is a mini excavator with an operating weight of 7,831 lb, a 27.8 hp engine, and a dig depth of 11.17 ft.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the Takeuchi TB135 sits above the median for its class:
- Operating weight 7,830 lb heavier than 69% (n=438)
- Engine power 28 hp more powerful than 64% (n=448)
- Dig depth 11.2 ft deeper-digging than 82% (n=426)
01 Boom/Stick Option (Hex) 1 Specification
| Shipping Length Of Unit | 16.58ft in | 5,054mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Loading Height | 12.5ft in | 3,810mm‖ — metric converted from the published imperial value |
| Max Reach Along Ground | 17.5ft in | 5,334mm‖ — metric converted from the published imperial value |
| Max Vertical Wall Digging Depth | 8.58ft in | 2,615mm‖ — metric converted from the published imperial value |
| Max Digging Depth | 11.17ft in | 3,405mm‖ — metric converted from the published imperial value |
02 Dimensions Specification
| Width To Outside Of Tracks | 5.33ft in | 1,625mm‖ — metric converted from the published imperial value |
|---|---|---|
| Length Of Track On Ground | 5.42ft in | 1,652mm‖ — metric converted from the published imperial value |
| Ground Clearance | 0.97ft in | 296mm‖ — metric converted from the published imperial value |
| Height To Top Of Cab | 8ft in | 2,438mm‖ — metric converted from the published imperial value |
| Tail Swing Radius | 4.58ft in | 1,396mm‖ — metric converted from the published imperial value |
03 Undercarriage Specification
| Shoe Size | 14in | 356mm‖ — metric converted from the published imperial value |
|---|---|---|
| Number Of Carrier Rollers Per Side | 1 | |
| Number Of Track Rollers Per Side | 4 | |
| Max Travel Speed | 2.9mph | 4.7km/h‖ — metric converted from the published imperial value |
| Ground Pressure | 3.9psi | 27kpa‖ — metric converted from the published imperial value |
04 Engine Specification
| Number Of Cylinders | 3 | |
|---|---|---|
| Engine Make | 2348 | |
| Engine Model | 3TNV88-QTB | |
| Gross Power | 27.8hp | 20.7kw‖ — metric converted from the published imperial value |
| Power Measured @ | 2300rpm | |
| Displacement | 100cu in | 1,639cm3‖ — metric converted from the published imperial value |
| Max Torque | 79lb ft | |
| Torque Measured @ | 1400rpm |
05 Operational Specification
| Operating Weight | 7831lb | 3,552kg‖ — metric converted from the published imperial value |
|---|---|---|
| Fuel Capacity | 13.5gal | 51.1l‖ — metric converted from the published imperial value |
| Cooling System Fluid Capacity | 1.5gal | 5.7l‖ — metric converted from the published imperial value |
| Hydraulic System Fluid Capacity | 22.5gal | 85.2l‖ — metric converted from the published imperial value |
| Engine Oil Capacity | 1.3gal | 4.9l‖ — metric converted from the published imperial value |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 40amps | |
| Hydraulic System Relief Valve Pressure | 3000psi | 20,684kpa‖ — metric converted from the published imperial value |
| Hydraulic Pump Flow Capacity | 19.8gal/min | 75l/min‖ — metric converted from the published imperial value |
06 Swing Mechanism Specification
| Swing Speed | 9.2rpm |
|---|
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.