Specification sheet Compact Track Loader Ref sunward-swtl4518-multi-terrain-loader
Sunward SWTL4518
The Sunward SWTL4518 is a compact track loader with an operating weight of 10,053.08 lb (4,560 kg), a 99.24 hp engine, a rated operating capacity of 3,306.94 lb (1,500 kg), and a 0.9 yd³ (0.7 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
10,053.08lb
4,560kg
Engine power
99.24hp
74kW
Net Power Rated operating capacity
3,306.94lb
1,500kg
Bucket capacity
0.9yd³
0.7m³
◆Where it sits in its classpercentile · compact track loaders
Among 184 compact track loaders , the Sunward SWTL4518 sits above the median for its class:
- Operating weight 10,050 lb heavier than 68% (n=182)
- Engine power 99 hp more powerful than 94% (n=167)
- Rated operating capacity 3,310 lb higher-rated than 76% (n=156)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2334 | |
| Engine Model | V3800DI | |
| Net Power | 99.3hp | 74kw |
| Power Measured @ | 2600rpm | |
| Peak Torque | 239.8lb ft | 325Nm |
| Torque Measured @ | 1600rpm |
02 Operational Specification
| Operating Weight | 10053.1lb | 4560kg |
|---|---|---|
| Cooling System Fluid Capacity | 2.7gal | 9.9L |
| Fuel Capacity | 23.8gal | 90L |
| Engine Oil Capacity | 3.5gal | 13.2L |
| Hydraulic System Fluid Capacity | 17.2gal | 65L |
| Max Speed - High Range | 6.9mph | 11km/h |
03 Loader Specification
| Breakout Force | 7606lb | 3450kg |
|---|---|---|
| Operating Load | 3307lb | 1500kg |
| Bucket Capacity | 0.9yd3 | 0.7m3 |
04 Hydraulic Specification
| Pump Type | Gear | |
|---|---|---|
| Pump Flow | 33gal/min | 124.8L/min |
| Relief Valve Pressure | 3626psi | 25000kPa |
05 Dimensions Dimensions
| Width Over Tracks | 6.6ft in | 2010mm |
|---|---|---|
| Height To Top Of Cab | 6.99ft in | 2130mm |
| Ground Clearance | 9.26in | 235mm |
| Clearance At Max Lift And Dump | 8.21ft in | 2500mm |
| Reach At Max Lift And Dump | 2.83ft in | 862mm |
| Length With Out Bucket | 9.48ft in | 2889mm |
| Length With Bucket | 12.01ft in | 3660mm |
| Turning Radius From Center - Inc Bucket | 90.12in | 2289mm |
| Turning Radius From Center - Machine Rear | 65.87in | 1673mm |
06 Undercarriage Dimensions
| Length Of Track On Ground | 5.25ft in | 1600mm |
|---|---|---|
| Track Gauge | 5.02ft in | 1530mm |
| Width Of Track | 17.72in | 450mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.