Specification sheet Wheel Loader Ref schaffer-9300z-wheel-loader
Schaffer 9300Z
The Schaffer 9300Z is a wheel loader with an operating weight of 13,778.9 lb (6,250 kg), a 100.5 hp engine, and a 1.44 yd³ (1.11 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
13,778.9lb
6,250kg
Engine power
100.5hp
74.9kW
Net Power Bucket capacity
1.44yd³
1.11m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Schaffer 9300Z sits in the middle of its class:
- Operating weight 13,780 lb heavier than 60% (n=374)
- Engine power 101 hp more powerful than 81% (n=367)
- Bucket capacity 1.4 yd³ larger-bucket than 52% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2349 | |
| Engine Model | BF4M2012 | |
| Net Power | 100.5hp | 74.9kw |
| Power Measured @ | 2500rpm | |
| Displacement | 244.1cu in | 4L |
| Aspiration | Turbocharged |
02 Operational Specification
| Operating Weight | 13778.9lb | 6250kg |
|---|---|---|
| Static Tipping Weight | 7936.7lb | 3600kg |
| Turning Radius | 5.7ft in | 1725mm |
| Tire Size | 405x70-20 |
03 Transmission Specification
| Transmission Type | Hydrostatic | |
|---|---|---|
| Number Of Forward Gears | 2 | |
| Number Of Reverse Gears | 2 | |
| Max Speed - Forward | 12.5mph | 20km/h |
| Max Speed - Reverse | 12.5mph | 20km/h |
04 Bucket Dimensions
| Dump Clearance At Max Raise | 9.85ft in | 3000mm |
|---|---|---|
| Bucket Width | 7.22ft in | 2200mm |
| Bucket Capacity - Heaped | 1.44yd3 | 1.11m3 |
05 Dimensions Dimensions
| Ground Clearance | 0.99ft in | 300mm |
|---|---|---|
| Length With Bucket On Ground | 17.54ft in | 5345mm |
| Width Over Tires | 6.73ft in | 2050mm |
| Height To Top Of Cab | 8.08ft in | 2460mm |
| Wheelbase | 7.12ft in | 2170mm |
| Reach At Max Lift And Dump | 1.53ft in | 465mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.