Specification sheet Wheel Loader Ref schaffer-5370z-wheel-loader
Schaffer 5370Z
The Schaffer 5370Z is a wheel loader with an operating weight of 11,023.12 lb (5,000 kg), a 68 hp engine, and a 1.06 yd³ (0.81 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
11,023.12lb
5,000kg
Engine power
68hp
50.7kW
Net Power Bucket capacity
1.06yd³
0.81m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Schaffer 5370Z sits below the median for its class:
- Operating weight 11,020 lb lighter than 65% (n=374)
- Engine power 68 hp less powerful than 55% (n=367)
- Bucket capacity 1.1 yd³ smaller-bucket than 68% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2334 | |
| Engine Model | V3300 | |
| Net Power | 68hp | 50.7kw |
| Power Measured @ | 2600rpm | |
| Displacement | 201.4cu in | 3.3L |
02 Operational Specification
| Operating Weight | 11023.2lb | 5000kg |
|---|---|---|
| Static Tipping Weight | 5842.3lb | 2650kg |
| Turning Radius | 5.1ft in | 1545mm |
| Tire Size | 15.0x55-17 |
03 Transmission Specification
| Transmission Type | Hydrostatic | |
|---|---|---|
| Number Of Forward Gears | 2 | |
| Number Of Reverse Gears | 2 | |
| Max Speed - Forward | 12.5mph | 20km/h |
| Max Speed - Reverse | 12.5mph | 20km/h |
04 Bucket Dimensions
| Dump Clearance At Max Raise | 8.86ft in | 2700mm |
|---|---|---|
| Bucket Width | 6.17ft in | 1880mm |
| Bucket Capacity - Heaped | 1.06yd3 | 0.81m3 |
05 Dimensions Dimensions
| Ground Clearance | 1.09ft in | 330mm |
|---|---|---|
| Length With Bucket On Ground | 15.98ft in | 4870mm |
| Width Over Tires | 5.75ft in | 1750mm |
| Height To Top Of Cab | 7.71ft in | 2350mm |
| Wheelbase | 6.34ft in | 1930mm |
| Reach At Max Lift And Dump | 1.97ft in | 600mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.