Specification sheet Wheel Loader Ref schaffer-2027-wheel-loader
Schaffer 2027
The Schaffer 2027 is a wheel loader with an operating weight of 3,306.94 lb (1,500 kg), a 25.1 hp engine, and a 0.4 yd³ (0.3 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
3,306.94lb
1,500kg
Engine power
25.1hp
18.7kW
Net Power Bucket capacity
0.4yd³
0.3m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Schaffer 2027 sits at the compact end of its class:
- Operating weight 3,310 lb lighter than 100% (n=374)
- Engine power 25 hp less powerful than 98% (n=367)
- Bucket capacity 0.4 yd³ smaller-bucket than 99% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 3 | |
|---|---|---|
| Engine Make | 2334 | |
| Engine Model | D1105 | |
| Net Power | 25.1hp | 18.7kw |
| Power Measured @ | 3000rpm | |
| Displacement | 67.2cu in | 1.1L |
02 Operational Specification
| Operating Weight | 3307lb | 1500kg |
|---|---|---|
| Static Tipping Weight | 1587.4lb | 720kg |
| Turning Radius | 3.2ft in | 975mm |
| Tire Size | 26x12-12 |
03 Transmission Specification
| Transmission Type | Hydrostatic | |
|---|---|---|
| Number Of Forward Gears | 1 | |
| Number Of Reverse Gears | 1 | |
| Max Speed - Forward | 9.4mph | 15km/h |
| Max Speed - Reverse | 9.4mph | 15km/h |
04 Bucket Dimensions
| Dump Clearance At Max Raise | 6.24ft in | 1900mm |
|---|---|---|
| Bucket Width | 4.11ft in | 1250mm |
| Bucket Capacity - Heaped | 0.4yd3 | 0.3m3 |
05 Dimensions Dimensions
| Ground Clearance | 0.66ft in | 200mm |
|---|---|---|
| Length With Bucket On Ground | 11.49ft in | 3500mm |
| Width Over Tires | 2.96ft in | 900mm |
| Height To Top Of Cab | 5.75ft in | 1750mm |
| Wheelbase | 4.52ft in | 1375mm |
| Reach At Max Lift And Dump | 1.91ft in | 580mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.