Specification sheet Wheel Loader Ref schaffer-2022s-wheel-loader
Schaffer 2022(S)
The Schaffer 2022(S) is a wheel loader with an operating weight of 3,858.09 lb (1,750 kg), a 26 hp engine, and a 0.2 yd³ (0.15 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
3,858.09lb
1,750kg
Engine power
26hp
19.39kW
Gross Power Bucket capacity
0.2yd³
0.15m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Schaffer 2022(S) sits at the compact end of its class:
- Operating weight 3,860 lb lighter than 99% (n=374)
- Engine power 26 hp less powerful than 98% (n=367)
- Bucket capacity 0.2 yd³ smaller-bucket than 100% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2334 | |
|---|---|---|
| Engine Model | D1105 | |
| Gross Power | 26hp | 19.4kw |
02 Operational Specification
| Operating Weight | 3858.1lb | 1750kg |
|---|---|---|
| Fuel Capacity | 6.1gal | 23L |
| Hydraulic System Fluid Capacity | 8gal | 30L |
| Static Tipping Weight | 1984.2lb | 900kg |
| Tire Size | 16X12-12 |
03 Transmission Specification
| Max Speed - Forward | 9.4mph | 15km/h |
|---|---|---|
| Max Speed - Reverse | 9.4mph | 15km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2900psi | 19994.8kPa |
|---|---|---|
| Pump Flow Capacity | 18.5gal/min | 70L/min |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 6.24ft in | 1900mm |
|---|---|---|
| Bucket Capacity - Heaped | 0.2yd3 | 0.15m3 |
| Breakout Force | 2248.09lb | 10kN |
06 Dimensions Dimensions
| Length With Bucket On Ground | 11.49ft in | 3500mm |
|---|---|---|
| Width Over Tires | 4.11ft in | 1250mm |
| Height To Top Of Cab | 6.89ft in | 2100mm |
| Wheelbase | 4.52ft in | 1375mm |
| Hinge Pin - Max Height | 8.21ft in | 2500mm |
| Reach At Max Lift And Dump | 1.91ft in | 580mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.