Scat Trak 2300DX
The Scat Trak 2300DX is a skid steer loader with an operating weight of 7,775 lb (3,526.69 kg), a 86 hp engine, a rated operating capacity of 2,450 lb (1,111.31 kg), and a tipping load of 4,900 lb (2,222.61 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the Scat Trak 2300DX sits above the median for its class:
- Operating weight 7,780 lb heavier than 74% (n=334)
- Engine power 86 hp more powerful than 93% (n=335)
- Rated operating capacity 2,450 lb higher-rated than 75% (n=288)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2351 | |
| Engine Model | 1004.42 | |
| Gross Power | 86hp | 64.2kw |
| Power Measured @ | 2400rpm | |
| Displacement | 258cu in | 4.3L |
02 Operational Specification
| Operational Weight | 7775lb | 3526.7kg |
|---|---|---|
| Fuel Capacity | 22.6gal | 85.2L |
| Hydraulic System Fluid Capacity | 17.2gal | 65L |
| Operating Speed | 6.3mph | 10.1km/h |
| Tire Size | 12.00x16.5 | |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 55amps |
03 Loader Specification
| Operating Load Rating | 2450lb | 1111.4kg |
|---|
04 Hydraulic Specification
| Pump Flow Capacity | 33gal/min | 125L/min |
|---|---|---|
| Relief Valve Pressure | 3000psi | 20684.3kPa |
05 Dimensions Dimensions
| Length With Bucket | 11.74ft in | 3576mm |
|---|---|---|
| Width Over Tires | 5.99ft in | 1824mm |
| Ground Clearance | 7.41in | 188mm |
| Height To Top Of Cab | 6.71ft in | 2045mm |
| Wheelbase | 3.62ft in | 1102mm |
| Length W/O Bucket | 9.34ft in | 2845mm |
| Clearance At Max Lift And Dump | 7.85ft in | 2390mm |
| Reach At Max Lift And Dump | 24.22in | 615mm |
| Turning Radius From Center - Machine Rear | 65.99in | 1676mm |
| Turning Radius From Center - Inc Bucket | 52.52in | 1334mm |
?Questions & answersfrom this machine's data
- How much does a Scat Trak 2300DX skid steer weigh?
- A Scat Trak 2300DX skid steer has an operating weight of 7,775 lb (3,526.7 kg).
- How much can a Scat Trak 2300DX skid steer lift?
- A Scat Trak 2300DX skid steer has a rated operating capacity of 2,450 lb (1,111.3 kg).
- What engine does a Scat Trak 2300DX skid steer have?
- A Scat Trak 2300DX skid steer is powered by a 1004.42 engine producing 86 hp (64.2 kW).
- What is the ground clearance of a Scat Trak 2300DX skid steer?
- A Scat Trak 2300DX skid steer has a ground clearance of 7.4 in (188 mm).
- How long is a Scat Trak 2300DX skid steer?
- A Scat Trak 2300DX skid steer has an overall length of 11.7 ft (3,576 mm) with the bucket on the ground.
Data notes
Derived value. tipping load was not published directly in a usable form by the source. It was reconstructed from related published figures and accepted only after validating against the expected relationship between specifications for this machine class.
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.