Specification sheet Wheel Loader Ref samsung-sl250-2-wheel-loader
Samsung SL250-2
The Samsung SL250-2 is a wheel loader with an operating weight of 45,966.39 lb (20,850 kg), a 256 hp engine, and a 4.84 yd³ (3.7 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
45,966.39lb
20,850kg
Engine power
256hp
190.9kW
Net Power Bucket capacity
4.84yd³
3.7m³
◆Where it sits in its classpercentile · medium wheel loaders
Among 198 medium wheel loaders (45,000–90,000 lb), the Samsung SL250-2 sits at the compact end of its class:
- Operating weight 45,970 lb lighter than 93% (n=198)
- Engine power 256 hp less powerful than 77% (n=190)
- Bucket capacity 4.8 yd³ smaller-bucket than 84% (n=174)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2347 | |
|---|---|---|
| Engine Model | LTA10-C | |
| Net Power | 256hp | 190.9kw |
| Power Measured @ | 2100rpm | |
| Max Torque | 845.7lb ft | 1146.6Nm |
| Displacement | 610.3cu in | 10L |
| Torque Measured @ | 1300rpm | |
| Aspiration | turbocharged |
02 Operational Specification
| Operating Weight | 45966.4lb | 20850kg |
|---|---|---|
| Fuel Capacity | 96.2gal | 364L |
| Hydraulic System Fluid Capacity | 67.4gal | 255L |
| Cooling System Fluid Capacity | 17.4gal | 65.8L |
| Transmission Fluid Capacity | 8.5gal | 32L |
| Static Tipping Weight | 37456.6lb | 16990kg |
| Turning Radius | 19.1ft in | 5800mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 50amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 23.5x25 |
03 Transmission Specification
| Transmission Type | countershaft | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 22.3mph | 35.8km/h |
| Max Speed - Reverse | 15.4mph | 24.7km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2840psi | 19581.1kPa |
|---|---|---|
| Pump Flow Capacity | 97.8gal/min | 370L/min |
| Raise Time | 6.2sec | |
| Dump Time | 1.4sec | |
| Lower Time | 3.6sec | |
| Pump Type | vane type |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.98ft in | 3040mm |
|---|---|---|
| Breakout Force | 41000lb | 182.38kN |
| Bucket Capacity - Heaped | 4.84yd3 | 3.7m3 |
| Bucket Capacity - Struck | 4.19yd3 | 3.2m3 |
| Bucket Width | 10.14ft in | 3090mm |
06 Dimensions Dimensions
| Ground Clearance | 1.46ft in | 445mm |
|---|---|---|
| Length With Bucket On Ground | 27.47ft in | 8370mm |
| Height To Top Of Cab | 11.4ft in | 3474mm |
| Wheelbase | 11.16ft in | 3400mm |
| Hinge Pin - Max Height | 13.57ft in | 4136mm |
| Reach At Max Lift And Dump | 4.07ft in | 1240mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.