Specification sheet Wheel Loader Ref samsung-sl180-2-wheel-loader
Samsung SL180-2
The Samsung SL180-2 is a wheel loader with an operating weight of 36,155.82 lb (16,400 kg), a 203 hp engine, and a 3.67 yd³ (2.8 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
36,155.82lb
16,400kg
Engine power
203hp
151.4kW
Net Power Bucket capacity
3.67yd³
2.8m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Samsung SL180-2 sits above the median for its class:
- Operating weight 36,160 lb heavier than 70% (n=439)
- Engine power 203 hp more powerful than 80% (n=408)
- Bucket capacity 3.7 yd³ larger-bucket than 66% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2347 | |
|---|---|---|
| Engine Model | C8.3-C | |
| Net Power | 203hp | 151.4kw |
| Power Measured @ | 2200rpm | |
| Max Torque | 621.7lb ft | 842.8Nm |
| Displacement | 506.5cu in | 8.3L |
| Torque Measured @ | 1500rpm | |
| Aspiration | turbocharged |
02 Operational Specification
| Operating Weight | 36155.9lb | 16400kg |
|---|---|---|
| Fuel Capacity | 66.1gal | 250L |
| Hydraulic System Fluid Capacity | 47.6gal | 180L |
| Cooling System Fluid Capacity | 15.4gal | 58L |
| Transmission Fluid Capacity | 7.4gal | 28L |
| Static Tipping Weight | 29982.9lb | 13600kg |
| Turning Radius | 18.1ft in | 5500mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 50amps | |
| Rear Axle Oscillation | 28degrees | |
| Tire Size | 23.5x25 |
03 Transmission Specification
| Transmission Type | countershaft | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 21.8mph | 35km/h |
| Max Speed - Reverse | 14mph | 22.5km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2990psi | 20615.4kPa |
|---|---|---|
| Pump Flow Capacity | 71.4gal/min | 270L/min |
| Raise Time | 6.1sec | |
| Dump Time | 1.4sec | |
| Lower Time | 3.4sec | |
| Pump Type | tandem gear pumps |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.7ft in | 2955mm |
|---|---|---|
| Breakout Force | 36910lb | 164.19kN |
| Bucket Capacity - Heaped | 3.67yd3 | 2.8m3 |
| Bucket Capacity - Struck | 3.27yd3 | 2.5m3 |
| Bucket Width | 9.19ft in | 2800mm |
06 Dimensions Dimensions
| Ground Clearance | 1.51ft in | 460mm |
|---|---|---|
| Length With Bucket On Ground | 25.56ft in | 7790mm |
| Height To Top Of Cab | 11.03ft in | 3360mm |
| Wheelbase | 10.5ft in | 3200mm |
| Hinge Pin - Max Height | 12.98ft in | 3956mm |
| Reach At Max Lift And Dump | 3.65ft in | 1110mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.