Specification sheet Wheel Loader Ref samsung-sl120-2-wheel-loader
Samsung SL120-2
The Samsung SL120-2 is a wheel loader with an operating weight of 22,707.62 lb (10,300 kg), a 126 hp engine, and a 2.23 yd³ (1.7 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
22,707.62lb
10,300kg
Engine power
126hp
94kW
Net Power Bucket capacity
2.23yd³
1.7m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Samsung SL120-2 sits at the compact end of its class:
- Operating weight 22,710 lb lighter than 95% (n=439)
- Engine power 126 hp less powerful than 87% (n=408)
- Bucket capacity 2.2 yd³ smaller-bucket than 91% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2347 | |
|---|---|---|
| Engine Model | 65T5.9-C | |
| Net Power | 126hp | 94kw |
| Power Measured @ | 2200rpm | |
| Max Torque | 375.9lb ft | 509.6Nm |
| Displacement | 360.1cu in | 5.9L |
| Torque Measured @ | 1400rpm | |
| Aspiration | turbocharged |
02 Operational Specification
| Operating Weight | 22707.7lb | 10300kg |
|---|---|---|
| Fuel Capacity | 52.9gal | 200L |
| Hydraulic System Fluid Capacity | 23.8gal | 90L |
| Cooling System Fluid Capacity | 9.1gal | 34.2L |
| Transmission Fluid Capacity | 6.5gal | 24.5L |
| Static Tipping Weight | 18298.4lb | 8300kg |
| Turning Radius | 15.4ft in | 4680mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 50amps | |
| Rear Axle Oscillation | 28degrees | |
| Tire Size | 17.5x25 |
03 Transmission Specification
| Transmission Type | Countershaft | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 20.7mph | 33.2km/h |
| Max Speed - Reverse | 13mph | 20.8km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2840psi | 19581.1kPa |
|---|---|---|
| Pump Flow Capacity | 50.2gal/min | 190L/min |
| Raise Time | 5.8sec | |
| Dump Time | 1.1sec | |
| Lower Time | 3.3sec | |
| Pump Type | vane pumps |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.22ft in | 2810mm |
|---|---|---|
| Bucket Capacity - Heaped | 2.23yd3 | 1.7m3 |
| Bucket Capacity - Struck | 1.84yd3 | 1.4m3 |
| Bucket Width | 8.04ft in | 2450mm |
| Breakout Force | 23810lb | 105.92kN |
06 Dimensions Dimensions
| Ground Clearance | 1.32ft in | 400mm |
|---|---|---|
| Length With Bucket On Ground | 22.38ft in | 6820mm |
| Width Over Tires | 8.16ft in | 2485mm |
| Height To Top Of Cab | 10.47ft in | 3190mm |
| Wheelbase | 9.36ft in | 2850mm |
| Hinge Pin - Max Height | 11.93ft in | 3635mm |
| Reach At Max Lift And Dump | 3.38ft in | 1030mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.