Specification sheet Wheel Loader Ref ranger-918-wheel-loader
Ranger 918
The Ranger 918 is a wheel loader with an operating weight of 13,448.2 lb (6,100 kg), a 77.8 hp engine, and a 1.31 yd³ (1 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
13,448.2lb
6,100kg
Engine power
77.8hp
58kW
Net Power Bucket capacity
1.31yd³
1m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Ranger 918 sits in the middle of its class:
- Operating weight 13,450 lb heavier than 59% (n=374)
- Engine power 78 hp more powerful than 62% (n=367)
- Bucket capacity 1.3 yd³ smaller-bucket than 56% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2351 | |
| Engine Model | 1004-4L03 | |
| Net Power | 77.8hp | 58kw |
| Power Measured @ | 2400rpm | |
| Displacement | 243.5cu in | 4L |
02 Operational Specification
| Operating Weight | 13448.2lb | 6100kg |
|---|---|---|
| Static Tipping Weight | 8093.2lb | 3671kg |
| Turning Radius | 8.4ft in | 2539mm |
| Tire Size | 16/70-20 |
03 Transmission Specification
| Transmission Type | Powershift | |
|---|---|---|
| Number Of Forward Gears | 2 | |
| Number Of Reverse Gears | 2 | |
| Max Speed - Forward | 16.5mph | 26.5km/h |
| Max Speed - Reverse | 15.6mph | 25km/h |
04 Bucket Dimensions
| Dump Clearance At Max Raise | 8.24ft in | 2510mm |
|---|---|---|
| Bucket Width | 7.03ft in | 2140mm |
| Bucket Capacity - Heaped | 1.31yd3 | 1m3 |
05 Dimensions Dimensions
| Ground Clearance | 0.96ft in | 290mm |
|---|---|---|
| Length With Bucket On Ground | 18.86ft in | 5748mm |
| Width Over Tires | 6.7ft in | 2040mm |
| Height To Top Of Cab | 9.59ft in | 2920mm |
| Wheelbase | 7.42ft in | 2260mm |
| Reach At Max Lift And Dump | 3.02ft in | 920mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.