Pel-Job EB450XT
The Pel-Job EB450XT is a mini excavator with an operating weight of 9,671.7 lb, a 37 hp engine, and a dig depth of 10.9 ft.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the Pel-Job EB450XT sits above the median for its class:
- Operating weight 9,670 lb heavier than 85% (n=438)
- Engine power 37 hp more powerful than 79% (n=448)
- Dig depth 10.9 ft deeper-digging than 76% (n=426)
01 Boom/Stick Option (Hex) 1 Specification
| Max Cutting Height | 16.18ft in | 4,932mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Loading Height | 11.95ft in | 3,642mm‖ — metric converted from the published imperial value |
| Max Reach Along Ground | 17.33ft in | 5,282mm‖ — metric converted from the published imperial value |
| Max Vertical Wall Digging Depth | 7.58ft in | 2,310mm‖ — metric converted from the published imperial value |
| Max Digging Depth | 10.9ft in | 3,322mm‖ — metric converted from the published imperial value |
| Boom/Stick Option (Hex) 1 | dipper 1400mm |
02 Boom/Stick Option (Hex) 2 Specification
| Max Cutting Height | 16.77ft in | 5,111mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Loading Height | 12.5ft in | 3,810mm‖ — metric converted from the published imperial value |
| Max Reach Along Ground | 18.28ft in | 5,572mm‖ — metric converted from the published imperial value |
| Max Vertical Wall Digging Depth | 8.37ft in | 2,551mm‖ — metric converted from the published imperial value |
| Max Digging Depth | 11.88ft in | 3,621mm‖ — metric converted from the published imperial value |
| Boom/Stick Option (Hex) 2 | dipper 1700mm |
03 Dimensions Specification
| Width To Outside Of Tracks | 5.91ft in | 1,801mm‖ — metric converted from the published imperial value |
|---|---|---|
| Length Of Track On Ground | 5.81ft in | 1,771mm‖ — metric converted from the published imperial value |
| Ground Clearance | 1.05ft in | 320mm‖ — metric converted from the published imperial value |
| Height To Top Of Cab | 8.24ft in | 2,512mm‖ — metric converted from the published imperial value |
| Tail Swing Radius | 4.47ft in | 1,362mm‖ — metric converted from the published imperial value |
| Removal Counterweight Clearance | 2.14ft in | 652mm‖ — metric converted from the published imperial value |
04 Undercarriage Specification
| Max Travel Speed | 2.68mph | 4.31km/h‖ — metric converted from the published imperial value |
|---|
05 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Model | K4N | |
| Gross Power | 42hp | 31kw‖ — metric converted from the published imperial value |
| Net Power | 37hp | 28kw‖ — metric converted from the published imperial value |
| Power Measured @ | 2600rpm | |
| Displacement | 139.8cu in | 2,291cm3‖ — metric converted from the published imperial value |
| Max Torque | 101.1lb ft | |
| Torque Measured @ | 1400rpm |
06 Operational Specification
| Operating Weight | 9671.7lb | 4,387kg‖ — metric converted from the published imperial value |
|---|---|---|
| Fuel Capacity | 17.5gal | 66.2l‖ — metric converted from the published imperial value |
| Cooling System Fluid Capacity | 2.2gal | 8.3l‖ — metric converted from the published imperial value |
| Hydraulic System Fluid Capacity | 16.4gal | 62.1l‖ — metric converted from the published imperial value |
| Engine Oil Capacity | 2.1gal | 7.9l‖ — metric converted from the published imperial value |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 40amps | |
| Hydraulic System Relief Valve Pressure | 3771psi | 26,000kpa‖ — metric converted from the published imperial value |
| Hydraulic Pump Flow Capacity | 26.2gal/min | 99.2l/min‖ — metric converted from the published imperial value |
07 Swing Mechanism Specification
| Swing Speed | 10rpm |
|---|
08 Buckets Specification
| Reference Bucket Capacity | 0.2yd3 | |
|---|---|---|
| Minimum Bucket Capacity | 0.1yd3 | |
| Maximum Bucket Capacity | 0.3yd3 |
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.