Pel-Job EB200XTV
The Pel-Job EB200XTV is a mini excavator with an operating weight of 3,847.1 lb, a 15 hp engine, and a dig depth of 8.54 ft.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the Pel-Job EB200XTV sits below the median for its class:
- Operating weight 3,850 lb lighter than 77% (n=438)
- Engine power 15 hp less powerful than 88% (n=448)
- Dig depth 8.5 ft shallower-digging than 57% (n=426)
01 Boom/Stick Option (Hex) 1 Specification
| Shipping Length Of Unit | 12.41ft in | 3,783mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Cutting Height | 12.8ft in | 3,901mm‖ — metric converted from the published imperial value |
| Shipping Height Of Unit | 7.45ft in | 2,271mm‖ — metric converted from the published imperial value |
| Max Loading Height | 9.26ft in | 2,822mm‖ — metric converted from the published imperial value |
| Max Reach Along Ground | 13.95ft in | 4,252mm‖ — metric converted from the published imperial value |
| Max Vertical Wall Digging Depth | 5.91ft in | 1,801mm‖ — metric converted from the published imperial value |
| Max Digging Depth | 8.54ft in | 2,603mm‖ — metric converted from the published imperial value |
| Boom/Stick Option (Hex) 1 | arm 1300mm |
02 Dimensions Specification
| Width To Outside Of Tracks | 4.43ft in | 1,350mm‖ — metric converted from the published imperial value |
|---|---|---|
| Length Of Track On Ground | 4.07ft in | 1,241mm‖ — metric converted from the published imperial value |
| Ground Clearance | 0.79ft in | 241mm‖ — metric converted from the published imperial value |
| Height To Top Of Cab | 7.45ft in | 2,271mm‖ — metric converted from the published imperial value |
| Tail Swing Radius | 3.68ft in | 1,122mm‖ — metric converted from the published imperial value |
| Removal Counterweight Clearance | 1.55ft in | 472mm‖ — metric converted from the published imperial value |
03 Undercarriage Specification
| Shoe Size | 9.85in | 250mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Travel Speed | 2.93mph | 4.72km/h‖ — metric converted from the published imperial value |
04 Engine Specification
| Engine Make | 2251 | |
|---|---|---|
| Engine Model | L3E | |
| Gross Power | 19hp | 14kw‖ — metric converted from the published imperial value |
| Net Power | 15hp | 11kw‖ — metric converted from the published imperial value |
| Power Measured @ | 2800rpm | |
| Displacement | 58.1cu in | 952cm3‖ — metric converted from the published imperial value |
| Max Torque | 39.9lb ft | |
| Torque Measured @ | 1850rpm |
05 Operational Specification
| Operating Weight | 3847.1lb | 1,745kg‖ — metric converted from the published imperial value |
|---|---|---|
| Fuel Capacity | 5.6gal | 21l‖ — metric converted from the published imperial value |
| Hydraulic System Fluid Capacity | 6.1gal | 23l‖ — metric converted from the published imperial value |
| Operating Voltage | 12V | |
| Hydraulic System Relief Valve Pressure | 3045.8psi | 21,000kpa‖ — metric converted from the published imperial value |
| Hydraulic Pump Flow Capacity | 15.1gal/min | 57.2l/min‖ — metric converted from the published imperial value |
06 Swing Mechanism Specification
| Swing Speed | 10rpm |
|---|
07 Buckets Specification
| Reference Bucket Capacity | 0.1yd3 | |
|---|---|---|
| Minimum Bucket Capacity | 0.1yd3 | |
| Maximum Bucket Capacity | 0.2yd3 |
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.