Specification sheet Wheel Loader Ref new-holland-w80tc-wheel-loader
New Holland W80TC
The New Holland W80TC is a wheel loader with an operating weight of 12,727 lb (5,772.87 kg), a 72 hp engine, and a 1.44 yd³ (1.11 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
12,727lb
5,772.87kg
Engine power
72hp
53.7kW
Net Power Bucket capacity
1.44yd³
1.11m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the New Holland W80TC sits in the middle of its class:
- Operating weight 12,730 lb heavier than 52% (n=374)
- Engine power 72 hp more powerful than 50% (n=367)
- Bucket capacity 1.4 yd³ larger-bucket than 52% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2349 | |
| Engine Model | BF4M2011 | |
| Net Power | 72hp | 53.7kw |
| Gross Power | 75hp | 56kw |
| Power Measured @ | 2300rpm | |
| Max Torque | 158lb ft | 214.3Nm |
| Displacement | 190cu in | 3.2L |
| Torque Measured @ | 1600rpm | |
| Aspiration | turbocharged |
02 Operational Specification
| Operating Weight | 12727lb | 5772.9kg |
|---|---|---|
| Fuel Capacity | 26.4gal | 100L |
| Hydraulic System Fluid Capacity | 19.5gal | 73.9L |
| Engine Oil Fluid Capacity | 2.6gal | 9.9L |
| Cooling System Fluid Capacity | 3.4gal | 12.9L |
| Front Axle/Diff Fluid Capacity | 2.4gal | 9.1L |
| Rear Axle/Diff Fluid Capacity | 2.5gal | 9.5L |
| Static Tipping Weight | 9744lb | 4419.9kg |
| Turning Radius | 12.7ft in | 3847mm |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 55amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 405/70 R20 |
03 Transmission Specification
| Transmission Type | Hydrostatic | |
|---|---|---|
| Number Of Forward Gears | 2 | |
| Number Of Reverse Gears | 2 | |
| Max Speed - Forward | 12.4mph | 20km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3335psi | 22994kPa |
|---|---|---|
| Pump Flow Capacity | 19gal/min | 72L/min |
| Raise Time | 6.6sec | |
| Dump Time | 1.1sec | |
| Lower Time | 3.5sec | |
| Pump Type | Gear |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.29ft in | 2829mm |
|---|---|---|
| Bucket Capacity - Heaped | 1.44yd3 | 1.11m3 |
| Bucket Capacity - Struck | 1.18yd3 | 0.91m3 |
| Bucket Width | 6.25ft in | 1905mm |
| Breakout Force | 11241lb | 50.01kN |
06 Dimensions Dimensions
| Ground Clearance | 1.09ft in | 330mm |
|---|---|---|
| Length With Bucket On Ground | 18.88ft in | 5753mm |
| Width Over Tires | 6.5ft in | 1981mm |
| Height To Top Of Cab | 9.21ft in | 2806mm |
| Wheelbase | 7.71ft in | 2350mm |
| Hinge Pin - Max Height | 11.35ft in | 3459mm |
| Reach At Max Lift And Dump | 2.92ft in | 889mm |
?Questions & answersfrom this machine's data
- How much does a New Holland W80TC wheel loader weigh?
- A New Holland W80TC wheel loader has an operating weight of 12,727 lb (5,772.9 kg).
- What engine does a New Holland W80TC wheel loader have?
- A New Holland W80TC wheel loader is powered by a BF4M2011 engine producing 72 hp (53.7 kW).
- What size bucket does a New Holland W80TC wheel loader have?
- A New Holland W80TC wheel loader has a bucket capacity of 1.4 yd³ (1.1 m³).
- How much fuel does a New Holland W80TC wheel loader hold?
- A New Holland W80TC wheel loader has a fuel capacity of 26.4 gal (100 L).
- What is the ground clearance of a New Holland W80TC wheel loader?
- A New Holland W80TC wheel loader has a ground clearance of 1.1 ft (330 mm).
- How long is a New Holland W80TC wheel loader?
- A New Holland W80TC wheel loader has an overall length of 18.9 ft (5,753 mm) with the bucket on the ground.
- How fast does a New Holland W80TC wheel loader travel?
- A New Holland W80TC wheel loader has a maximum forward travel speed of 12.4 mph (20 km/h).
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.