Specification sheet Wheel Loader Ref new-holland-w60tc-wheel-loader

New Holland W60TC

The New Holland W60TC is a wheel loader with an operating weight of 11,122.33 lb (5,045 kg), a 60 hp engine, and a 1.05 yd³ (0.8 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
11,122.33lb
5,045kg
Engine power
60hp
44.8kW
Net Power
Bucket capacity
1.05yd³
0.8m³

Where it sits in its classpercentile · compact wheel loaders

Among 374 compact wheel loaders (≤22,000 lb), the New Holland W60TC sits below the median for its class:

  • Operating weight 11,120 lb lighter than 63% (n=374)
  • Engine power 60 hp less powerful than 65% (n=367)
  • Bucket capacity 1.1 yd³ smaller-bucket than 76% (n=309)

Scale drawingdrawn to scale · mm

2800B330C5250A
Side elevation
2800B1910D
Front elevation

01 Engine Specification

Number Of Cylinders 4
Engine Make 2349
Engine Model BF4M2011
Net Power 60hp 44.8kw
Power Measured @ 2400rpm
Displacement 190cu in 3.2L
Aspiration Natural

02 Operational Specification

Operating Weight 11122.4lb 5045kg
Fuel Capacity 26.5gal 100L
Hydraulic System Fluid Capacity 17.7gal 67L
Static Tipping Weight 7716.2lb 3500kg
Turning Radius 14.5ft in 4400mm
Operating Voltage 12V
Alternator Supplied Amperage 55amps
Rear Axle Oscillation 24degrees
Tire Size 365/80 R20

03 Transmission Specification

Transmission Type Hydrostatic
Number Of Forward Gears 2
Number Of Reverse Gears 2
Max Speed - Forward 12.5mph 20km/h

04 Hydraulic System Specification

Relief Valve Setting 3916.1psi 27000kPa
Pump Flow Capacity 17.7gal/min 67L/min
Pump Type Gear

05 Bucket Dimensions

Dump Clearance At Max Raise 8.54ft in 2600mm
Bucket Width 6.73ft in 2050mm
Bucket Capacity - Heaped 1.05yd3 0.8m3

06 Dimensions Dimensions

Ground Clearance 1.09ft in 330mm
Length With Bucket On Ground 17.23ft in 5250mm
Width Over Tires 6.27ft in 1910mm
Height To Top Of Cab 9.19ft in 2800mm
Wheelbase 7.39ft in 2250mm
Hinge Pin - Max Height 10.83ft in 3300mm
Reach At Max Lift And Dump 2.56ft in 780mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.