Specification sheet Wheel Loader Ref new-holland-w270-wheel-loader
New Holland W270
The New Holland W270 is a wheel loader with an operating weight of 52,161.38 lb (23,660 kg), a 275 hp engine, and a 5.89 yd³ (4.5 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
52,161.38lb
23,660kg
Engine power
275hp
205.1kW
Net Power Bucket capacity
5.89yd³
4.5m³
◆Where it sits in its classpercentile · medium wheel loaders
Among 198 medium wheel loaders (45,000–90,000 lb), the New Holland W270 sits in the middle of its class:
- Operating weight 52,160 lb lighter than 56% (n=198)
- Engine power 275 hp less powerful than 53% (n=190)
- Bucket capacity 5.9 yd³ larger-bucket than 60% (n=174)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2347 | |
| Engine Model | QSM11 | |
| Net Power | 275hp | 205.1kw |
| Power Measured @ | 2100rpm | |
| Max Torque | 107lb ft | 145Nm |
| Displacement | 659.1cu in | 10.8L |
| Torque Measured @ | 1200rpm | |
| Aspiration | turbocharged, aftercooled |
02 Operational Specification
| Operating Weight | 52161.4lb | 23660kg |
|---|---|---|
| Fuel Capacity | 96.2gal | 364L |
| Hydraulic System Fluid Capacity | 38.1gal | 144L |
| Engine Oil Fluid Capacity | 9gal | 34L |
| Cooling System Fluid Capacity | 20.4gal | 77L |
| Transmission Fluid Capacity | 9.3gal | 35L |
| Front Axle/Diff Fluid Capacity | 12.7gal | 48L |
| Rear Axle/Diff Fluid Capacity | 12.7gal | 48L |
| Static Tipping Weight | 42659.5lb | 19350kg |
| Turning Radius | 22.7ft in | 6900mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 70amps | |
| Rear Axle Oscillation | 26degrees | |
| Tire Size | 26.5-25 XHA |
03 Transmission Specification
| Transmission Type | Power-Shift Countershaft | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 23mph | 36.9km/h |
| Max Speed - Reverse | 24.8mph | 39.8km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3045.8psi | 21000kPa |
|---|---|---|
| Pump Flow Capacity | 102.5gal/min | 388L/min |
| Raise Time | 6.2sec | |
| Dump Time | 1.4sec | |
| Lower Time | 3.8sec | |
| Pump Type | Sealed system with anticavitation and relief valves |
05 Bucket Dimensions
| Bucket Capacity - Heaped | 5.89yd3 | 4.5m3 |
|---|---|---|
| Bucket Capacity - Struck | 5.37yd3 | 4.1m3 |
| Bucket Width | 9.85ft in | 3000mm |
| Breakout Force | 4631063.95lb | 20600kN |
06 Dimensions Dimensions
| Ground Clearance | 1.61ft in | 490mm |
|---|---|---|
| Length With Bucket On Ground | 28.83ft in | 8785mm |
| Width Over Tires | 9.72ft in | 2960mm |
| Height To Top Of Cab | 11.77ft in | 3587mm |
| Wheelbase | 11.16ft in | 3400mm |
| Hinge Pin - Max Height | 14.41ft in | 4390mm |
| Reach At Max Lift And Dump | 4.02ft in | 1225mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.