Specification sheet Wheel Loader Ref new-holland-w230-wheel-loader
New Holland W230
The New Holland W230 is a wheel loader with an operating weight of 47,377.35 lb (21,490 kg), a 225 hp engine, and a 5.24 yd³ (4 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
47,377.35lb
21,490kg
Engine power
225hp
167.8kW
Net Power Bucket capacity
5.24yd³
4m³
◆Where it sits in its classpercentile · medium wheel loaders
Among 198 medium wheel loaders (45,000–90,000 lb), the New Holland W230 sits at the compact end of its class:
- Operating weight 47,380 lb lighter than 87% (n=198)
- Engine power 225 hp less powerful than 89% (n=190)
- Bucket capacity 5.2 yd³ smaller-bucket than 72% (n=174)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2347 | |
| Engine Model | 6CTAA 8.3 | |
| Net Power | 225hp | 167.8kw |
| Power Measured @ | 2200rpm | |
| Max Torque | 73.1lb ft | 99Nm |
| Displacement | 506.5cu in | 8.3L |
| Torque Measured @ | 1200rpm |
02 Operational Specification
| Operating Weight | 47377.4lb | 21490kg |
|---|---|---|
| Fuel Capacity | 85.9gal | 325L |
| Hydraulic System Fluid Capacity | 34.4gal | 130L |
| Engine Oil Fluid Capacity | 6.4gal | 24L |
| Cooling System Fluid Capacity | 15.9gal | 60L |
| Transmission Fluid Capacity | 10.6gal | 40L |
| Front Axle/Diff Fluid Capacity | 10.1gal | 38L |
| Rear Axle/Diff Fluid Capacity | 10.1gal | 38L |
| Static Tipping Weight | 37941.6lb | 17210kg |
| Turning Radius | 22ft in | 6700mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 50amps | |
| Rear Axle Oscillation | 22degrees | |
| Tire Size | 23.5-25 GP-2B |
03 Transmission Specification
| Transmission Type | Power-Shift Countershaft | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 24.9mph | 40km/h |
| Max Speed - Reverse | 27.3mph | 43.8km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3045.8psi | 21000kPa |
|---|---|---|
| Pump Flow Capacity | 94.9gal/min | 359L/min |
| Raise Time | 6.2sec | |
| Dump Time | 1.4sec | |
| Lower Time | 3.5sec | |
| Pump Type | Two gear type with steel case and automatic wear compensation. |
05 Bucket Dimensions
| Bucket Capacity - Heaped | 5.24yd3 | 4m3 |
|---|---|---|
| Bucket Capacity - Struck | 4.84yd3 | 3.7m3 |
| Bucket Width | 10.06ft in | 3065mm |
| Breakout Force | 4114003.41lb | 18300kN |
06 Dimensions Dimensions
| Ground Clearance | 1.61ft in | 490mm |
|---|---|---|
| Length With Bucket On Ground | 27.55ft in | 8395mm |
| Width Over Tires | 9.54ft in | 2905mm |
| Height To Top Of Cab | 11.5ft in | 3505mm |
| Wheelbase | 10.83ft in | 3300mm |
| Hinge Pin - Max Height | 13.72ft in | 4180mm |
| Reach At Max Lift And Dump | 3.86ft in | 1175mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.