Specification sheet Wheel Loader Ref new-holland-w190b-wheel-loader
New Holland W190B
The New Holland W190B is a wheel loader with an operating weight of 39,074 lb (17,723.67 kg), a 195 hp engine, and a 4.5 yd³ (3.44 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
39,074lb
17,723.67kg
Engine power
195hp
145.5kW
Net Power Bucket capacity
4.5yd³
3.44m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the New Holland W190B sits above the median for its class:
- Operating weight 39,070 lb heavier than 81% (n=439)
- Engine power 195 hp more powerful than 73% (n=408)
- Bucket capacity 4.5 yd³ larger-bucket than 91% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2249 | |
| Engine Model | 667TA/E3 | |
| Net Power | 195hp | 145.5kw |
| Gross Power | 209hp | 155.9kw |
| Power Measured @ | 2000rpm | |
| Max Torque | 724lb ft | 981.7Nm |
| Displacement | 415cu in | 6.8L |
| Torque Measured @ | 1400rpm | |
| Aspiration | Turbochaged, air to air cooled | |
| Torque Rise | 33% |
02 Operational Specification
| Operating Weight | 39074lb | 17723.7kg |
|---|---|---|
| Fuel Capacity | 76gal | 287.7L |
| Hydraulic System Fluid Capacity | 46gal | 174.2L |
| Engine Oil Fluid Capacity | 5gal | 18.9L |
| Cooling System Fluid Capacity | 10.8gal | 40.9L |
| Transmission Fluid Capacity | 10.5gal | 39.8L |
| Front Axle/Diff Fluid Capacity | 2.5gal | 9.2L |
| Rear Axle/Diff Fluid Capacity | 1.6gal | 5.9L |
| Static Tipping Weight | 30055lb | 13632.8kg |
| Turning Radius | 19.8ft in | 6032mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 70amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 23.5x25 L3 Bias Ply |
03 Transmission Specification
| Transmission Type | Countershaft, Power shift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 24mph | 38.7km/h |
| Max Speed - Reverse | 15.6mph | 25.2km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3600psi | 24821.2kPa |
|---|---|---|
| Pump Flow Capacity | 45.2gal/min | 171.2L/min |
| Raise Time | 5.6sec | |
| Dump Time | 1.1sec | |
| Lower Time | 2.7sec | |
| Pump Type | Variable-Displacement, Piston Pump |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.78ft in | 2979mm |
|---|---|---|
| Bucket Capacity - Heaped | 4.5yd3 | 3.44m3 |
| Bucket Capacity - Struck | 3.78yd3 | 2.89m3 |
| Bucket Width | 9.95ft in | 3030mm |
| Breakout Force | 34785lb | 154.74kN |
06 Dimensions Dimensions
| Ground Clearance | 1.37ft in | 415.8mm |
|---|---|---|
| Length With Bucket On Ground | 25.82ft in | 7869mm |
| Width Over Tires | 9.47ft in | 2885mm |
| Height To Top Of Cab | 11.38ft in | 3467mm |
| Wheelbase | 10.96ft in | 3340mm |
| Hinge Pin - Max Height | 13.53ft in | 4122mm |
| Reach At Max Lift And Dump | 3.81ft in | 1161mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.