Specification sheet Wheel Loader Ref new-holland-w170tc-wheel-loader
New Holland W170TC
The New Holland W170TC is a wheel loader with an operating weight of 30,445.84 lb (13,810 kg), a 197 hp engine, and a 3.67 yd³ (2.8 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
30,445.84lb
13,810kg
Engine power
197hp
147kW
Net Power Bucket capacity
3.67yd³
2.8m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the New Holland W170TC sits in the middle of its class:
- Operating weight 30,450 lb lighter than 51% (n=439)
- Engine power 197 hp more powerful than 74% (n=408)
- Bucket capacity 3.7 yd³ larger-bucket than 66% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Model | CNH F4HE0684J | |
| Net Power | 197hp | 147kw |
| Power Measured @ | 2000rpm | |
| Displacement | 415cu in | 6.8L |
| Aspiration | turbo aftercooler |
02 Operational Specification
| Operating Weight | 30445.9lb | 13810kg |
|---|---|---|
| Fuel Capacity | 66.9gal | 253L |
| Hydraulic System Fluid Capacity | 51gal | 193L |
| Engine Oil Fluid Capacity | 4gal | 15L |
| Cooling System Fluid Capacity | 10.6gal | 40L |
| Transmission Fluid Capacity | 10.6gal | 40L |
| Static Tipping Weight | 25573.7lb | 11600kg |
| Turning Radius | 20.7ft in | 6300mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 50amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 23.5-25 RT-3B |
03 Transmission Specification
| Transmission Type | PowerShift CounterShaft | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 23.7mph | 38km/h |
| Max Speed - Reverse | 16.1mph | 25.8km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3626psi | 25000kPa |
|---|---|---|
| Pump Flow Capacity | 54.5gal/min | 206L/min |
| Raise Time | 5.6sec | |
| Dump Time | 2.4sec | |
| Lower Time | 3.3sec | |
| Pump Type | load sensing circuit, closed centre |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.39ft in | 2860mm |
|---|---|---|
| Bucket Width | 9.06ft in | 2760mm |
| Bucket Capacity - Heaped | 3.67yd3 | 2.8m3 |
06 Dimensions Dimensions
| Ground Clearance | 1.2ft in | 365mm |
|---|---|---|
| Length With Bucket On Ground | 25.46ft in | 7760mm |
| Height To Top Of Cab | 11.08ft in | 3375mm |
| Wheelbase | 10.68ft in | 3255mm |
| Hinge Pin - Max Height | 13.06ft in | 3980mm |
| Reach At Max Lift And Dump | 3.99ft in | 1215mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.